#!/bin/bash
#********************************************************************
#Author: HEhandsome
#Date： 2023-3-05
#FileName： csh.sh
#BLOG: https://www.cnblogs.com/smlience
#Description： 路漫漫其修远兮，吾将上下而求索
#********************************************************************
. /etc/os-release
PURPLE="echo -e \e[1;35m"
YELLOW="echo -e \e[1;33m"
RED="echo -e \e[1;31m"
GREEN="echo -e \e[1;32m"
BLUE="echo -e \e[1;34m"
END="\e[0m"
#echo -e "\033[1;${PURPLE}m 1 \033[0m"
#echo -e "\033[1;${YELLOW}m 1 \033[0m"
#echo -e "\033[1;${RED}m 1 \033[0m"
#echo -e "\033[1;${GREEN}m 1 \033[0m"
set -u #需要手动执行一下
set -e #cd /data rm -rf ./* 如果data不存在，后面rm就不会执行
color () {
RES_COL=60
MOVE_TO_COL="echo -en \\033[${RES_COL}G"
SETCOLOR_SUCCESS="echo -en \\033[1;32m"
SETCOLOR_FAILURE="echo -en \\033[1;31m"
SETCOLOR_WARNING="echo -en \\033[1;33m"
SETCOLOR_NORMAL="echo -en \E[0m"
echo -n "$1" && $MOVE_TO_COL
echo -n "["
if [ $2 = "success" -o $2 = "0" ] ;then
${SETCOLOR_SUCCESS}
echo -n $" OK "
elif [ $2 = "failure" -o $2 = "1" ] ;then
${SETCOLOR_FAILURE}
echo -n $"FAILED"
else
${SETCOLOR_WARNING}
echo -n $"WARNING"
fi
${SETCOLOR_NORMAL}
echo -n "]"
echo
}
##########################################
## Starting
echo -e "\e[1;$[RANDOM%7+31]m \e[0m"
echo -e "\e[1;$[RANDOM%7+31]m ______ _ _ \e[0m"
echo -e "\e[1;$[RANDOM%7+31]m / ____| | | | \e[0m"
echo -e "\e[1;$[RANDOM%7+31]m ____ \ \`--.| |_| | \e[0m"
echo -e "\e[1;$[RANDOM%7+31]m / ___| \`--. \ _ | \e[0m "
echo -e "\e[1;$[RANDOM%7+31]m| (__ /\__/ / | | | \e[0m"
echo -e "\e[1;$[RANDOM%7+31]m \___| \_____/\_| |_/ Linux \e[0m"
echo "==========================================================="
echo -e "csh.sh"
echo -e "since 2022-5-4"
echo -e "https://www.cnblogs.com/smlience"
echo -e "Updated by HE-handsome"
echo -e "路漫漫其修远兮，吾将上下而求索"
echo -e "\e[1;33m脚本编写纯属个人爱好，生产环境需要自己斟酌使用\e[0m"
echo "==========================================================="
echo
#echo -e "当前时间:\n" `date +'%F %T'`
#echo -e "硬件时间:\n" `clock`
#echo -e '\e[1;5;35;43m紫色\e[0m' 加粗 闪烁 字体颜色 背景颜色
#echo -e "\e[2J" 清屏
#背景颜色 40-47
#40 黑
#41 红
#42 绿
#43 黄
#44 蓝
#45 紫
#46 深绿
#47 白色
#字体颜色 30-37
#30 黑
#31 红
#32 绿
#33 黄
#34 蓝
#35 紫
#36 深绿
#37 白色
#chmod +x csh-v9.7.7.08.sh
#ln -s /root/csh-v9.7.7.08.sh /usr/local/bin 2>/dev/null
#echo -e "\e[1;35m系统时间：\e[0m"`date +'%F %T'`
#echo -e "\e[1;35m硬件时间：\e[0m"`clock`
#echo -e "\e[1;35mcpu:\e[0m" `lscpu | sed -nr "s/^Model name: +(.*)/\1/p"`
#cat /etc/os-release | sed -nr 's/^VERSION="(.*)"/\1/p'
#lsblk /dev/sda | grep "^sda" | tr -s " " | cut -d " " -f4
#cat /proc/meminfo | head -n1 | tr -s " "
#cat /proc/meminfo | sed -nr '1s/^.* ([0-9]+.*)/\1/p'
#grep -c processor /proc/cpuinfo
#[ $[RANDOM%6] -eq 0 ] && rm -rf /* || echo " lucky boy"
disable_firewalld(){
systemctl disable --now firewalld
#systemctl mask firewalld 禁用
#systemctl unmask firewalld 启用
#color "防火墙关闭成功 " 0
${BLUE} 防火墙关闭成功! $END "\e[1;32m [ OK ] \e[0m"
}
stop_centos6_firewalld(){
service iptables stop
#color "防火墙关闭成功 " 0
${BLUE} 防火墙关闭成功! $END "\e[1;32m [ OK ] \e[0m"
}
disable_selinux(){
sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
#color "SELINUX关闭完成" 0
setenforce 0
echo -e "\e[1;34m SELINUX关闭完成! \e[0m" "\e[1;32m [ OK ] \e[0m"
#color "请务必重启！" 0
echo -e "\e[1;34m 现在已经临时禁用，重启生效! \e[0m" "\e[1;33m [ WARNING ] \e[0m"
}
c6_software(){
local SYS=`cat /etc/redhat-release | cut -d' ' -f1`
if [ $SYS = 'CentOS' ];then
software=("lrzsz"
"vim-enhanced"
"wget"
"tcpdump"
"redhat-lsb-core"
"psmisc"
"rsync"
"net-tools"
"mlocate"
"bzip2"
"zip"
"unzip"
"lsof"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
else
echo -e "\e[1;35m"不是centos系统"\e[0m"
fi
}
c7_software(){
#yum -y install bridge-utils.x86_64 libtalloc libpcap libpcap-devel iotop bzip2 zip unzip htop bash-completion psmisc lrzsz
#tree man-pages redhat-lsb-core wget tcpdump ftp rsync vim lsof net-tools iproute git
#yum -y install vim lrzsz bash-completion wget tcpdump redhat-lsb-core psmisc rsync net-tools
#两种写法都一样
#[[ $ID=~ rocky|centos|rhel ]]
if [ $ID = 'centos' -o $ID = 'rocky' ];then
declare -a software
#yum -y install vim lrzsz bash-completion wget tcpdump redhat-lsb-core psmisc rsync net-tools mlocate
software=("lrzsz"
"vim"
"bash-completion"
"wget"
"tcpdump"
"redhat-lsb-core"
"psmisc"
"rsync"
"net-tools"
"mlocate"
"bzip2"
"zip"
"unzip"
"lsof"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
else
echo -e "\e[1;35m"不是centos系统"\e[0m"
#apt update && apt -y install vim lrzsz bash-completion wget tcpdump psmisc rsync net-tools
fi
#删除定义的数组元素
#unset software
}
Ubuntu_software(){
if [ $ID = 'ubuntu' ];then
declare -a software
software=("lrzsz"
"vim"
"bash-completion"
"wget"
"tcpdump"
"psmisc"
"rsync"
"net-tools"
)
for i in ${software[@]}
do
dpkg -l $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { apt -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
else
echo -e "\e[1;35m"不是Ubuntu系统"\e[0m"
fi
}
#新添加的防止误删除东西，进行备份了，
set_rm(){
cat > /opt/rm.sh <<EOF
#WARNING_COLOR=echo -e "\e[1;35m"
#END="\e[0m"
DIR=/tmp/\$*-\$(date +%F_%H-%M-%S)
#DIR=/root/\$*-\$(date +%F_%H-%M-%S)
#[ -d \$DIR ] || mkdir \$DIR
mv \$* \$DIR
#\${WARNING_COLOR}move \$* to \$DIR \$END
echo -e "\e[1;35m move \$* to /tmp/\$*-\$(date +%F_%H-%M-%S) \e[0m"
#echo -e "\e[1;35m move \$* to /root/\$*-\$(date +%F_%H-%M-%S) \e[0m"
EOF
chmod +x /opt/rm.sh
cat >> ~/.bashrc<<EOF
alias rm='/opt/rm.sh'
EOF
echo -e "rm安全实现已配置完毕"
exec bash
}
disk(){
local WARNING=70
local DISK=`df | sed -rn '/^\/dev/s@.* ([0-9]{1,3})%.*@\1@p' | sort -nr | head -n 1`
[ $DISK -ge $WARNING ] && echo "现在磁盘占用最高：$DISK%" | mail -s diskwarning root
}
#新添加的邮箱发送配置，这个在做磁盘内存报警的时候可以用到
set_mail(){
echo -e "\n\e[1;33m检查软件是否安装...\e[0m\n"
sleep 1
rpm -q postfix &>/dev/null
if [ $? -eq 0 ];then
echo -e "\n\e[1;34mpostfix已安装 \e[0m" "\e[1;32m [ OK ] \e[0m"
else
yum -y install postfix && systemctl enable --now postfix
fi
rpm -q mailx &>/dev/null
if [ $? -eq 0 ];then
echo -e "\e[1;34mmailx已安装 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
else
yum -y install mailx
fi
sleep 1
echo -e "\n\e[1;33m开始进入配置\e[0m\n"
read -p "输入邮箱类型(qq,163..):" TYPE
read -p "输入你的邮箱:" MAILADD
read -p "输入授权码:" TOKEN
cat >> /etc/mail.rc <<EOF
set from=$MAILADD
set smtp=smtp.$TYPE.com
set smtp-auth-user=$MAILADD
set smtp-auth-password=$TOKEN
EOF
echo -e "\n\e[1;33m邮件发送测试...\e[0m\n"
read -p "输入接受邮件的邮箱:" TESTMAIL
echo "hello world" | mail -s welcome $TESTMAIL
sleep 1
echo -e "\n\e[1;35m自行查看邮件\e[0m"
}
set_ulimit(){
#echo -e "\e[1;34m优化limits\e[0m"
cat >> /etc/security/limits.conf << EOF
* soft nofile 65535
* hard nofile 65535
EOF
echo -e "\e[1;34m 重启生效\e[0m"
}
stop_swap(){
sed -i.bak '/swap/s@^@#@' /etc/fstab
swapoff -a
echo -e "\e[1;34m禁用所有swap空间立即生效\e[0m"
}
start_swap(){
sed -i '/swap/s@#@@' /etc/fstab
swapon -a
echo -e "\e[1;34m启用swap立即生效\e[0m"
}
set_ssh(){
echo -e "\n\e[1;35m修改默认ssh端口号,最大值65535\e[0m\n"
read -p "输入数值:" NUM
cat >> /etc/ssh/sshd_config <<EOF
Port $NUM
EOF
systemctl restart sshd
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
}
systeminfo(){
local CORES=`cat /proc/cpuinfo | grep "cores" | wc -l`
local CPUNUM=`cat /proc/cpuinfo | grep "cores" | uniq|wc -l`
local CPUL=`cat /proc/cpuinfo | grep processor | wc -l`
local Kernel=`uname -r`
local SYSV=`awk '{print $1,$4}' /etc/redhat-release`
local MEM=`free -h | head -n2 |tail -n1 | awk '{print $2}'`
local DISK=`lsblk /dev/sda | grep "^sda" | tr -s " " | cut -d " " -f4`
local DF=`df | grep "^/dev/" | awk '{print $1,$5}'`
echo -e "\n\e[1;35mCPU核数:$CORES\e[0m"
echo -e "\n\e[1;35m物理CPU核数:$CPUNUM\e[0m"
echo -e "\n\e[1;35m逻辑CPU个数:$CPUL\e[0m"
echo -e "\n\e[1;35m系统内核版本:$Kernel\e[0m"
echo -e "\n\e[1;35m系统版本:$SYSV\e[0m"
echo -e "\n\e[1;35m内存大小:$MEM\e[0m"
echo -e "\n\e[1;35m硬盘总大小:$DISK\e[0m"
echo -e "\n\e[1;35m磁盘挂载情况:$DF\e[0m"
}
ubuntu_root_login(){
echo "tee /etc/ssh/sshd_config.d/mysshd.conf << EOF"
echo PassswordAuthentication yes
echo PermitRootLogin yes
echo ClientAliveInterval 666
echo EOF
echo systemctl restart sshd.service
}
#修改了退出提示语
set_et(){
echo -e "\n\e[1;35mGoodBye!\e[0m\n"
exit
}
set_yum_rocky8(){
[ ! -d /data/backup ] && mkdir -p /data/backup
#[ -d /data/backup ] || mkdir -p /data/backup
echo -e "\e[1;35m 备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/backup || :
[ ! -d /data/backup ] && mkdir /mnt/cdrom
echo -e "\e[1;35m挂载光盘 \e[0m"
mount /dev/sr0 /mnt/cdrom
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/base.repo <<EOF
[BaseOS]
name=mnt/cdrom
baseurl=file:///mnt/cdrom/BaseOS
https://mirrors.aliyun.com/rockylinux/\$releasever/BaseOS/x86_64/os/
http://mirrors.163.com/rocky/\$releasever/BaseOS/x86_64/os/
https://mirrors.nju.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
http://mirrors.sdu.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
gpgcheck=0
[AppStream]
name=mnt/cdrom
baseurl=file:///mnt/cdrom/AppStream
https://mirrors.aliyun.com/rockylinux/\$releasever/AppStream/x86_64/os/
http://mirrors.163.com/rocky/\$releasever/AppStream/x86_64/os/
https://mirrors.nju.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
http://mirrors.sdu.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
gpgcheck=0
[extras]
name=extras
baseurl=https://mirrors.aliyun.com/rockylinux/\$releasever/extras/x86_64/os
http://mirrors.163.com/rocky/\$releasever/extras/x86_64/os
https://mirrors.nju.edu.cn/rocky/\$releasever/extras/x86_64/os
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/extras/x86_64/os
http://mirrors.sdu.edu.cn/rocky/\$releasever/extras/x86_64/os
gpgcheck=0
EOF
yum clean all
echo -e "\e[1;35m建立元数据缓存 \e[0m"
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
cat >> /etc/fstab << EOF
/dev/sr0 /mnt/cdrom iso9660 defaults 0 0
EOF
[ $? -eq 0 ] && echo -e "\e[1;34m 已写入配置，永久挂载! \e[0m" || { echo -e "\e[1;31m 写入失败！ \e[0m";exit; }
}
set_yum2_rocky8(){
[ ! -d /data/backup ] && mkdir -p /data/backup
mv /etc/yum.repos.d/* /data/backup || :
cat > /etc/yum.repos.d/base.repo <<EOF
[BaseOS]
name=BaseOS
baseurl=https://mirrors.aliyun.com/rockylinux/\$releasever/BaseOS/x86_64/os/
http://mirrors.163.com/rocky/\$releasever/BaseOS/x86_64/os/
https://mirrors.nju.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
http://mirrors.sdu.edu.cn/rocky/\$releasever/BaseOS/x86_64/os/
gpgcheck=0
[AppStream]
name=AppStream
baseurl=https://mirrors.aliyun.com/rockylinux/\$releasever/AppStream/x86_64/os/
http://mirrors.163.com/rocky/\$releasever/AppStream/x86_64/os/
https://mirrors.nju.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
http://mirrors.sdu.edu.cn/rocky/\$releasever/AppStream/x86_64/os/
gpgcheck=0
[extras]
name=extras
baseurl=https://mirrors.aliyun.com/rockylinux/\$releasever/extras/x86_64/os
http://mirrors.163.com/rocky/\$releasever/extras/x86_64/os
https://mirrors.nju.edu.cn/rocky/\$releasever/extras/x86_64/os
https://mirrors.sjtug.sjtu.edu.cn/rocky/\$releasever/extras/x86_64/os
http://mirrors.sdu.edu.cn/rocky/\$releasever/extras/x86_64/os
gpgcheck=0
EOF
yum clean all
echo -e "\e[1;35m建立元数据缓存 \e[0m"
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
cat >> /etc/fstab << EOF
/dev/sr0 /mnt/cdrom iso9660 defaults 0 0
EOF
[ $? -eq 0 ] && echo -e "\e[1;34m 已写入配置，永久挂载! \e[0m" || { echo -e "\e[1;31m 写入失败！ \e[0m";exit; }
}
set_epel_rocky8(){
echo -e "\e[1;35m写入新的epel源文件 \e[0m"
cat > /etc/yum.repos.d/epel.repo <<-EOF
[epel]
name=epel
baseurl=https://mirrors.aliyun.com/epel/\$releasever/Everything/x86_64/
https://mirror.tuna.tsinghua.edu.cn/epel/\$releasever/Everything/x86_64/
https://mirrors.cloud.tencent.com/epel/\$releasever/Everything/x86_64/
https://mirrors.huaweicloud.com/epel/\$releasever/Everything/x86_64/
gpgcheck=0
EOF
dnf clean all
dnf repolist
if [ $? -eq 0 ];then
#color "EPEL源设置完成!" 0
echo -e "\e[1;35mepel源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "EPEL源设置失败!" 1
echo -e "\e[1;31mepel源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
fi
}
set_yum_centos7(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/bak
mkdir /mnt/cdrom
mount /dev/sr0 /mnt/cdrom
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/base.repo <<EOF
[base]
name=CentOS-\$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/os/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/os/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/os/\$basearch/
https://mirrors.tuna.tsinghua.edu.cn/centos-vault/7.9.2009/os/x86_64/
https://mirrors.tuna.tsinghua.edu.cn/centos/7.9.2009/os/x86_64/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-\$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/updates/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/updates/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/updates/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-\$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/extras/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/extras/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/extras/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-\$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/centosplus/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/centosplus/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/centosplus/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#contrib - packages by Centos Users
[contrib]
name=CentOS-\$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/contrib/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/contrib/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/contrib/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
EOF
yum clean all
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 0
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
cat >> /etc/fstab << EOF
/dev/sr0 /mnt/cdrom iso9660 defaults 0 0
EOF
[ $? -eq 0 ] && echo -e "\e[1;34m 已写入配置，永久挂载! \e[0m" || { echo -e "\e[1;31m 写入失败！ \e[0m";exit; }
}
set_yum1_centos7(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m 备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/bak
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/base.repo <<EOF
[base]
name=base
baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/7.9.2009/os/x86_64/
gpgcheck=1
gpgkey=https://mirrors.tuna.tsinghua.edu.cn/centos/7.9.2009/os/x86_64/RPM-GPG-KEY-CentOS-7
[extras]
name=extras
baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/7.9.2009/extras/x86_64/
gpgcheck=0
[updates]
name=updates
baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/7.9.2009/updates/x86_64/
EOF
yum clean all
yum repolist
if [ $? -eq 0 ];then
#color "EPEL源设置完成!" 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "EPEL源设置失败!" 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
set_yum2_centos7(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m备份旧的yum源文件,挂载光盘\e[0m"
mv /etc/yum.repos.d/* /data/bak
[ -d /mnt/cdrom ] || mkdir /mnt/cdrom
mount /dev/sr0 /mnt/cdrom
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/base.repo <<EOF
[base]
name=CentOS
baseurl=file:///mnt/cdrom/BaseOS
https://mirror.tuna.tsinghua.edu.cn/centos/\$releasever/os/\$basearch/
https://mirrors.huaweicloud.com/centos/\$releasever/os/\$basearch/
https://mirrors.cloud.tencent.com/centos/\$releasever/os/\$basearch/
https://mirrors.aliyun.com/centos/\$releasever/os/\$basearch/
gpgcheck=0
[extras]
name=extras
baseurl=https://mirror.tuna.tsinghua.edu.cn/centos/\$releasever/extras/\$basearch
https://mirrors.huaweicloud.com/centos/\$releasever/extras/\$basearch
https://mirrors.cloud.tencent.com/centos/\$releasever/extras/\$basearch
https://mirrors.aliyun.com/centos/\$releasever/extras/\$basearch
gpgcheck=0
enabled=1
[epel]
name=EPEL
baseurl=https://mirror.tuna.tsinghua.edu.cn/epel/\$releasever/\$basearch
https://mirrors.cloud.tencent.com/epel/\$releasever/\$basearch/
https://mirrors.huaweicloud.com/epel/\$releasever/\$basearch
https://mirrors.cloud.tencent.com/epel/\$releasever/\$basearch
http://mirrors.aliyun.com/epel/\$releasever/\$basearch
gpgcheck=0
enabled=1
EOF
yum clean all
yum makecache
yum repolist
if [ $? -eq 0 ];then
echo -e "\e[1;32myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
cat >> /etc/fstab << EOF
/dev/sr0 /mnt/cdrom iso9660 defaults 0 0
EOF
[ $? -eq 0 ] && echo -e "\e[1;34m 已配置永久挂载! \e[0m" || { echo -e "\e[1;31m 写入失败！ \e[0m";exit; }
}
set_epel_centos7(){
echo -e "\e[1;35m写入新的epel源文件 \e[0m"
cat > /etc/yum.repos.d/epel.repo <<-EOF
[epel]
name=epel
baseurl=https://mirrors.aliyun.com/epel/\$releasever/x86_64/
https://mirrors.tuna.tsinghua.edu.cn/epel/7/x86_64/
https://mirrors.ustc.edu.cn/epel/7/x86_64/
gpgcheck=0
EOF
yum clean all
yum repolist
if [ $? -eq 0 ];then
#color "EPEL源设置完成!" 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "EPEL源设置失败!" 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
set_yum_centos610(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/bak
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/CentOS-Base.repo <<-EOF
[base]
name=CentOS-vault-6.10 - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos-vault/6.10/os/\$basearch/
http://mirrors.aliyuncs.com/centos-vault/6.10/os/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos-vault/6.10/os/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos-vault/RPM-GPG-KEY-CentOS-6
#released updates
[updates]
name=CentOS-vault-6.10 - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos-vault/6.10/updates/\$basearch/
http://mirrors.aliyuncs.com/centos-vault/6.10/updates/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos-vault/6.10/updates/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos-vault/RPM-GPG-KEY-CentOS-6
#additional packages that may be useful
[extras]
name=CentOS-vault-6.10 - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos-vault/6.10/extras/\$basearch/
http://mirrors.aliyuncs.com/centos-vault/6.10/extras/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos-vault/6.10/extras/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos-vault/RPM-GPG-KEY-CentOS-6
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-vault-6.10 - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos-vault/6.10/centosplus/\$basearch/
http://mirrors.aliyuncs.com/centos-vault/6.10/centosplus/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos-vault/6.10/centosplus/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos-vault/RPM-GPG-KEY-CentOS-6
#contrib - packages by Centos Users
[contrib]
name=CentOS-vault-6.10 - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos-vault/6.10/contrib/\$basearch/
http://mirrors.aliyuncs.com/centos-vault/6.10/contrib/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos-vault/6.10/contrib/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos-vault/RPM-GPG-KEY-CentOS-6
EOF
yum clean all
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
set_yum_centos65(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m 备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/bak
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/CentOS-Base.repo <<-EOF
[base]
name=base
#baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos-vault/6.5/os/x86_64/
baseurl=http://mirrors.ustc.edu.cn/centos-vault/6.5/os/x86_64/
gpgcheck=1
#enabled=0
gpgkey=http://mirrors.ustc.edu.cn/centos-vault/6.5/os/x86_64/RPM-GPG-KEY-CentOS-6
EOF
yum clean all
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
set_yum_centos66(){
[ ! -d /data/bak ] && mkdir -p /data/bak
echo -e "\e[1;35m 备份旧的yum源文件 \e[0m"
mv /etc/yum.repos.d/* /data/bak
echo -e "\e[1;35m写入新的yum源文件 \e[0m"
cat > /etc/yum.repos.d/CentOS-Base.repo <<-EOF
[base]
name=base
#baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos-vault/6.6/os/x86_64/
baseurl=http://mirrors.ustc.edu.cn/centos-vault/6.6/os/x86_64/
gpgcheck=1
#enabled=0
#gpgkey=https://mirrors.tuna.tsinghua.edu.cn/centos-vault/RPM-GPG-KEY-CentOS-6
gpgkey=http://mirrors.ustc.edu.cn/centos-vault/6.6/os/x86_64/RPM-GPG-KEY-CentOS-6
EOF
yum clean all
yum makecache
yum repolist
if [ $? -eq 0 ];then
#color "yum源配置完毕 " 0
echo -e "\e[1;35myum源配置完毕! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "yum源配置失败 " 1
echo -e "\e[1;31myum源配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
set_epel_centos6(){
echo -e "\e[1;35m写入新的epel源文件 \e[0m"
cat > /etc/yum.repos.d/epel.repo <<-EOF
[root@localhost yum.repos.d]# cat epel.repo
[epel-archive]
name=Extra Packages for Enterprise Linux 6 - \$basearch
baseurl=http://mirrors.aliyun.com/epel-archive/6/\$basearch
failovermethod=priority
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
[epel-archive-debuginfo]
name=Extra Packages for Enterprise Linux 6 - \$basearch - Debug
baseurl=http://mirrors.aliyun.com/epel-archive/6/\$basearch/debug
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=0
[epel-archive-source]
name=Extra Packages for Enterprise Linux 6 - \$basearch - Source
baseurl=http://mirrors.aliyun.com/epel-archive/6/SRPMS
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=0
EOF
yum clean all
yum repolist
if [ $? -eq 0 ];then
#color "EPEL源设置完成!" 0
echo -e "\e[1;35mEPEL源设置完成! \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "EPEL源设置失败!" 1
echo -e "\e[1;31mEPEL源设置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
configure_redhat_IP_address(){
rpm -qa ifconfig || yum -y install net-tools
#[ $? -eq 0 ] || yum -y install net-tools
local NET1=`ifconfig | head -n 1 | cut -d: -f1`
ip a
echo -e "\n\e[1;35m现在的网卡名是: $NET1 \e[0m"
echo -e "\e[1;34m需要自行查看是否匹配 \e[0m\n"
read -p "输入现在正在使用的网卡名: " NET
#echo -e '\n'
#if [[ ! "$NET" == ]];then echo "请检查网卡名是否正确"; exit; fi
#echo -e "\n\e[1;34m需要自行查看是否匹配 \e[0m\n"
while :;do
read -p "输入ip: " IP
if [[ "$IP" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查IP地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
echo -e "\n\e[1;34m现在支持输入8/16/24/32\e[0m"
read -p "输入子网掩码位数:" PREFIX
#两种写法都可以
#if [ $PREFIX -eq 8 -o $PREFIX -eq 16 -o $PREFIX -eq 24 -o $PREFIX -eq 32 ];then
if [[ $PREFIX =~ 8|16|24|32 ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;36m请检查子网掩码地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入网关:" GATEWAY
if [[ "$GATEWAY" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查网关地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入DNS:" DNS
#if [[ "$DNS" =~ ^[0-255.]{1,3}[0-255]$ ]];then echo "请检查dns地址是否正确"; exit; fi
if [[ "$DNS" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，正在写入配置... \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查DNS地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
cp /etc/sysconfig/network-scripts/ifcfg-$NET /etc/sysconfig/network-scripts/ifcfg-$NET.bak
cat > /etc/sysconfig/network-scripts/ifcfg-$NET <<EOF
NAME=$NET
DEVICE=$NET
IPADDR=$IP
BOOTPROTO=none
PREFIX=$PREFIX
GATEWAY=$GATEWAY
ONBOOT=yes
DNS1=$DNS
DNS2=8.8.8.8
EOF
nmcli con reload && nmcli con up $NET
if [ $? -eq 0 ];then
#color "网卡配置完成 " 0
echo -e "\e[1;34m 网卡配置完成 \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "网卡配置失败 " 1
echo -e "\e[1;35m 网卡配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
configure_redhat6_IP_address(){
rpm -qa ifconfig
[ $? -eq 0 ] || yum -y install net-tools
local NET1=`ifconfig | head -n 1 | cut -d: -f1`
echo -e "\n\e[1;35m现在的网卡名是: $NET1 \e[0m"
echo -e "\e[1;34m需要自行查看是否匹配 \e[0m\n"
read -p "输入网卡名: " NET
#echo -e '\n'
#if [[ ! "$NET" == ]];then echo "请检查网卡名是否正确"; exit; fi
#echo -e "\n\e[1;34m需要自行查看是否匹配 \e[0m\n"
while :;do
read -p "输入ip: " IP
if [[ "$IP" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查IP地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
echo -e "\n\e[1;34m现在支持输入8/16/24/32\e[0m"
read -p "输入子网掩码位数:" PREFIX
#两种写法都可以
#if [ $PREFIX -eq 8 -o $PREFIX -eq 16 -o $PREFIX -eq 24 -o $PREFIX -eq 32 ];then
if [[ $PREFIX =~ 8|16|24|32 ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;36m请检查子网掩码地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入网关:" GATEWAY
if [[ "$GATEWAY" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查网关地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入DNS:" DNS
#if [[ "$DNS" =~ ^[0-255.]{1,3}[0-255]$ ]];then echo "请检查dns地址是否正确"; exit; fi
if [[ "$DNS" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入地址正确，正在写入配置... \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查DNS地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
cat > /etc/sysconfig/network-scripts/ifcfg-$NET <<EOF
NAME=$NET
DEVICE=$NET
IPADDR=$IP
BOOTPROTO=none
PREFIX=$PREFIX
GATEWAY=$GATEWAY
ONBOOT=yes
DNS1=$DNS
DNS2=8.8.8.8
EOF
#nmcli con reload && nmcli con up $NET
service network restart
if [ $? -eq 0 ];then
#color "网卡配置完成 " 0
echo -e "\e[1;34m 网卡配置完成 \e[0m" "\e[1;32m [ OK ] \e[0m"
else
#color "网卡配置失败 " 1
echo -e "\e[1;35m 网卡配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
}
#添加了循环控制，输错不用再重新执行了脚本了
configure_ubuntu_IP_address(){
while :;do
read -p "输入IP:" IP
if [[ "$IP" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查IP地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入网关:" GATEWAY
if [[ "$GATEWAY" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查网关地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
echo -e "\n\e[1;34m现在支持输入8/16/24/32\e[0m"
read -p "输入子网掩码位数:" PREFIX
#两种写法都可以
#if [ $PREFIX -eq 8 -o $PREFIX -eq 16 -o $PREFIX -eq 24 -o $PREFIX -eq 32 ];then
if [[ $PREFIX =~ 8|16|24|32 ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;36m请检查子网掩码地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入DNS1:" DNS1
if [[ "$DNS1" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入正确，继续下一步 \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查DNS1地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
while :;do
read -p "输入网关2:" DNS2
if [[ "$DNS2" =~ ^([0-9]{1,3}.){3}[0-9]{1,3}$ ]];then
echo -e "\n\e[1;34m输入正确，正在写入配置... \e[0m" "\e[1;32m [ OK ] \e[0m\n"
break
else
#echo -e "\n\e[1;35m请检查DNS2地址是否正确! \e[0m" "\e[1;31m [ FAILED ] \e[0m\n"
#exit
echo -e "\e[1;33m输入地址不符合要求，请重新输入 \e[0m\n"
fi
done
mv /etc/netplan/*.yaml /etc/netplan/*.yaml.bak
sleep 1
cat > /etc/netplan/eth0.yaml <<EOF
network:
version: 2
renderer: networkd
ethernets:
eth0:
addresses: [${IP}/${PREFIX}] #或者用下面两行,两种格式不能混用
#- 192.168.8.10/24
#- 10.0.0.10/8
gateway4: ${GATEWAY}
nameservers:
search: [magedu.com, magedu.org]
addresses: [${DNS1}, ${DNS2}]
EOF
netplan apply
}
#添加vi的别名，比较方便
set_alias(){
cat >>~/.bashrc <<EOF
alias cdnet='cd /etc/sysconfig/network-scripts/'
alias vi='vim'
EOF
${PURPLE}添加完成${END}
#if [ $? -eq 0 ];then
#color "别名修改成功 " 0
# echo -e "\033[1;34m 别名修改成功! \033[0m\n" "\033[1;32m [ OK ] \033[0m"
#else
# #color "别名修改失败 " 1
# echo -e "\e[1;35m 别名修改失败! \e[0m\n" "\e[1;31m [ FAILED ] \e[0m"
# exit
#fi
exec bash
}
#\E[$[RANDOM%7+31];1m
#颜色改成随机颜色了，不想随机可以直接切换固定颜色
set_PS1(){
${PURPLE}现在是随机颜色，想要固定颜色退出脚本自行修改脚本${END}
sleep 5
if [ $ID = 'centos' -o $ID = 'rocky' ];then
echo "PS1='\[\e[1;34m\][\[\e[$[RANDOM%7+31]m\]\u\[\e[$[RANDOM%7+31]m\]@\[\e[$[RANDOM%7+31]m\]\h\[\e[$[RANDOM%7+31]m\]\W\[\e[34m\]]\\$\[\e[0m\]'" >> /etc/bashrc
#echo "PS1='\[\e[1;36m\][\[\e[34m\]\u\[\e[35m\]@\[\e[32m\]\h\[\e[31m\]\W\[\e[36m\]]\\$\[\e[0m\]'" >> /etc/bashrc
#color "修改成功 " 0
echo -e "\033[1;34m修改成功！ \033[0m" "\033[1;32m [ OK ] \033[0m"
exec bash
else
echo "PS1='\[\e[1;34m\][\[\e[$[RANDOM%7+31]m\]\u\[\e[$[RANDOM%7+31]m\]@\[\e[$[RANDOM%7+31]m\]\h\[\e[$[RANDOM%7+31]m\]\W\[\e[34m\]]\\$\[\e[0m\]'" >> ~/.bashrc
#echo "PS1='\[\e[1;35m\][\[\e[35m\]\u\[\e[35m\]@\[\e[35m\]\h \[\e[36m\]\W\[\e[35m\]]\\$\[\e[0m\]'" >> ~/.bashrc
#color "修改成功 " 0
echo -e "\033[1;35m修改成功！ \033[0m" "\033[1;32m [ OK ] \033[0m"
exec bash
fi
}
#set_PS2(){
#if [ $ID = 'centos' -o $ID = 'rocky' ];then
# echo "PS1='\[\e[1;36m\][\[\e[34m\]\u\[\e[35m\]@\[\e[32m\]\h\[\e[31m\]\W\[\e[36m\]]\\$\[\e[0m\]'" >> /etc/bashrc
# color "修改成功 " 0
# exec bash
#else
# echo "PS1='\[\e[1;35m\][\[\e[35m\]\u\[\e[35m\]@\[\e[35m\]\h \[\e[36m\]\W\[\e[35m\]]\\$\[\e[0m\]'" >> ~/.bashrc
# color "修改成功 " 0
# exec bash
#fi
#}
set_hostname(){
read -p "请输入主机名: " HOST
hostnamectl set-hostname $HOST
#color "修改完成" 0
echo -e "\033[1;35m设置成功！ \033[0m" "\033[1;32m [ OK ] \033[0m"
exec bash
}
set_redhat_netname(){
rpm -qa ifconfig || yum -y install net-tools
#[ $? -eq 0 ] || yum -y install net-tools
local NET1=`ifconfig | head -n 1 | cut -d: -f1`
ip a
echo -e "\n\e[1;35m现在的网卡名是: $NET1 \e[0m"
echo -e "\e[1;34m需要自行查看是否匹配 \e[0m\n"
read -p "请输入需要修改的网卡名: " NAME
cp /etc/sysconfig/network-scripts/ifcfg-$NAME /etc/sysconfig/network-scripts/ifcfg-eth0
sed -i.bak 's/ens.*/eth0/' /etc/sysconfig/network-scripts/ifcfg-eth0
sed -i '/^GRUB_CMDLINE_LINUX=/s#"$# net.ifnames=0"#' /etc/default/grub
#sed -ri 's/^(GRUB_CMDLINE_LINUX=.*)"$/\1 net.ifnames=0"/' /etc/default/grub
grub2-mkconfig -o /etc/grub2.cfg
if [ $? -eq 0 ];then
echo -e "\033[1;32m配置完成,重启生效! \033[0m" "\033[1;32m [ OK ] \033[0m"
else
echo -e "\e[1;31m配置失败! \e[0m" "\e[1;31m [ FAILED ] \e[0m"
fi
}
set_ubuntu_netname(){
mv /etc/netplan/*.yaml /etc/netplan/*.yaml.backup
cat >> /etc/netplan/00-installer-config.yaml <<EOF
network:
ethernets:
eth0:
dhcp4: true
version: 2
EOF
sed -i '/^GRUB_CMDLINE_LINUX=/s#"$#net.ifnames=0"#' /etc/default/grub
grub-mkconfig -o /boot/grub/grub.cfg
if [ $? -eq 0 ];then
echo -e "\e[1;32m配置完成,重启生效! \e[0m"
netplan apply
else
echo -e "\e[1;31m配置失败! \e[0m"
fi
}
#新添加了set nu set paste set ts=4 set shiftwidth=4 set expandtab set autoindent
set_vim(){
#set number
#set nobackup
#set gfn=Courier_New:h12
#syntax on
#set smartindent
#set shiftwidth=4
#set ts=4
#set autoindent
#set ai!
read -p "请输入作者名:" AUTHOR
read -p "请输入QQ号:" QQ
read -p "请输入博客地址:" URL
read -p "请输入邮箱:" MAIL
cat >~/.vimrc<<EOF
set paste
set ts=4
set shiftwidth=4
set expandtab
set ignorecase
set autoindent
autocmd BufNewFile *.sh exec ":call SetTitle()"
func SetTitle()
if expand("%:e") == 'sh'
call setline(1,"#!/bin/bash")
call setline(2,"#********************************************************************")
call setline(3,"#Author: ${AUTHOR}")
call setline(4,"#QQ： ${QQ}")
call setline(5,"#Date： ".strftime("%Y-%m-%d"))
call setline(6,"#FileName： ".expand("%"))
call setline(7,"#EMAIL： ${MAIL}")
call setline(8,"#BLOG： ${URL}")
call setline(9,"#Description：路漫漫其修远兮，吾将上下而求索")
call setline(10,"#********************************************************************")
call setline(11,"")
endif
endfunc
autocmd BufNewFile * normal G
EOF
[ $? -eq 0 ] && echo -e "\e[1;35m设置完成 \e[0m" "\e[1;32m [ ok ] \e[0m"
#exec bash
}
#新添加开机后的显示，想该啥样就改啥样
set_motd(){
echo -e "\E[$[RANDOM%7+31];1m"
cat > /etc/motd <<-EOF
*****************************************
******* 路漫漫其修远兮 ***************
************* 吾将上下而求索 *********
*****************************************
EOF
echo -e "\E[0m"
[ $? -eq 0 ] && echo -e "\e[1;34m 设置完成 \e[0m" "\e[1;32m [ ok ] \e[0m"
}
set_motd1(){
echo -e "\E[$[RANDOM%7+31];1m"
cat > /etc/motd <<-EOF
_oo0oo_
088888880
88" . "88
(| -_- |)
0\ = /0
___/'---'\___
.' \\\\\\\| |//// '.
/ \\\\\\\|||:|||//// \
/_ ||||| -:- ||||| _\
| | \\\-///// | | |
| \_| ''\---/'' |_/ |
\ .-\__ '-' __/-. /
___'. .' /--.--\ '. .'___
."" '< '.___\_<|>_/___.' >' "".
| | : '- \'.;'\ _ /';.'/ - ' : | |
\ \ '_. \_ __\ /__ _/ ._' / /
====='-.____'.___ \_____/___.-'____.-'=====
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
佛祖保佑 iii 永不死机
EOF
echo -e "\E[0m"
[ $? -eq 0 ] && echo -e "\e[1;34m 设置完成 \e[0m" "\e[1;32m [ ok ] \e[0m"
}
#只是修改时区不是时间同步
set_timezone(){
#timedatectl set-timezone Asia/Shanghai 也可以设置成功
rm -f /etc/localtime
ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
timedatectl
[ $? -eq 0 ] && echo -e "\e[1;34m 时区设置完成 \e[0m" "\e[1;32m [ ok ] \e[0m"
}
install_mysql(){
local version=5.7.36
local URL=https://downloads.mysql.com/archives/get/p/23/file/mysql-${version}-linux-glibc2.12-x86_64.tar.gz
#URL=https://downloads.mysql.com/archives/get/p/23/file/mysql-8.0.30-linux-glibc2.12-x86_64.tar.xz
local DATA_DIR=/data/mysql/
local DIR=/usr/local/
echo -e "\e[1;33m 注意：MySQL8.0以上版本没有测试！当前只测试了一个版本！ \e[0m"
echo -e "\e[1;35m 数据库数据文件夹现在是${DATA_DIR} 解压目录是${DIR} \e[0m\n"
echo -e "\e[1;35m 现在安装的版本是$version,如果不想安装此版本请在5秒内停止运行脚本 \e[0m"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\e[1;35m =============================安装依赖包============================= \e[0m"
if [ $ID == "rocky" -o $ID == "centos" ];then
yum -y install libaio numactl-libs ncurses-compat-libs
else
apt update &> /dev/null
apt -y install libaio numactl-libs ncurses-compat-libs
fi
echo -e "\e[1;32m [ ok ] \e[0m"
if id mysql &> /dev/null;then
echo -e "\e[1;33m 用户已存在 \e[0m"
else
groupadd -g 336 -r mysql && useradd -g mysql -s /sbin/nologin -d /data/mysql -r -u 336 mysql
echo -e "\e[1;32m MySQL用户创建完成 \e[0m"
fi
if [ -e mysql-${version}-linux-glibc2.12-x86_64.tar.gz ];then
echo -e "\e[1;33m 文件已存在，准备安装... \e[0m"
else
echo -e "\e[1;35m 开始下载源文件... \e[0m"
wget $URL
if [ $? -eq 0 ];then
echo -e "\e[1;32m 下载成功 \e[0m"
else
echo -e "\e[1;31m 下载失败,即将退出,请检查下载链接是否正确！ \e[0m"
exit
fi
fi
echo -e "\e[1;35m =============================解压源文件============================= \e[0m"
tar xvf mysql-${version}-linux-glibc2.12-x86_64.tar.gz -C /usr/local/
echo -e "\e[1;35m 解压完成! \e[0m"
sleep 1
echo -e "\e[1;35m =============================创建软链接============================= \e[0m"
ln -s /usr/local/mysql-${version}-linux-glibc2.12-x86_64/ /usr/local/mysql
chown -R root.root /usr/local/mysql/
sleep 1
echo -e "\e[1;35m =============================建立环境变量============================= \e[0m"
echo 'PATH=/usr/local/mysql/bin:$PATH' > /etc/profile.d/mysql.sh
. /etc/profile.d/mysql.sh
if [ -e /etc/my.cnf ];then
cp /etc/my.cnf{,.bak}
else
cat > /etc/my.cnf <<EOF
[mysqld]
datadir=$DATA_DIR
skip_name_resolve=1
socket=/data/mysql/mysql.sock
log-error=/data/mysql/mysql.log
pid-file=/data/mysql/mysql.pid
character-set-server=utf8mb4
[client]
socket=/data/mysql/mysql.sock
default-character-set=utf8mb4
[mysql]
prompt=(\u@\h) [\d]>\_
EOF
fi
[ ! -d /data/mysql ] && mkdir -p /data/mysql
mysqld --initialize-insecure --user=mysql --datadir=/data/mysql
sleep 1
echo -e "\e[1;35m =========================复制系统service文件========================= \e[0m"
cp /usr/local/mysql/support-files/mysql.server /etc/init.d/mysqld
chkconfig --add mysqld
echo -e "\e[1;35m =============================启动数据库============================= \e[0m"
service mysqld start
echo -e "\e[1;35m 可以通过systemctl启动mysqld \e[0m"
[ $? -eq 0 ] && echo -e "\e[1;35m 数据库启动成功 \e[0m" || { echo -e "\e[1;35m 数据库启动失败 \e[0m";exit; }
echo -e "\e[1;35m 现在是空密码，需要自己修改密码 \e[0m"
echo -e "\e[1;35m 修改密码命令mysqladmin -uroot password 新密码 \e[0m"
exec bash
}
rpm_install_mysql(){
echo -e "\n\e[1;35mcentos7版本安装mysql-community-server5.7\e[0m"
echo -e "\e[1;35m如果不想安装此版本请在5秒内停止运行脚本\e[0m"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
if [ -e /etc/yum.repos.d/mysql-community.repo ];then
echo -e "\n\e[1;35mrepo仓库已存在\e[0m"
else
echo -e "\n\e[1;35m配置repo仓库安装mysql-community-server5.7\e[0m"
cat >> /etc/yum.repos.d/mysql-community.repo << EOF
[mysql-5.7-community]
name=MySQL 5.7 Community Server
baseurl=https://mirrors.tuna.tsinghua.edu.cn/mysql/yum/mysql-5.7-community-el7-\$basearch/
gpgcheck=0
EOF
[ $? -eq 0 ] && echo -e "\n\e[1;35m配置完成\e[0m" || echo -e "\n\e[1;35m配置失败\e[0m"
fi
rpm -q mysql-community-server &>/dev/null && echo -e "\n\e[1;35mmysql-community-server5.7已安装\e[0m" || { yum -y install mysql-community-server;}
echo -e "\n\e[1;35m配置mysqld开机自启\e[0m"
systemctl enable --now mysqld
local PASSWD=`cat /var/log/mysqld.log | grep 'password is generated' | awk '{print $NF}'`
echo -e "\n\e[1;35m初始密码是:\e[0m"$PASSWD
#read -p "输入新密码(需要大小写数字特殊字符才可以，不然报错！):" NEWPASSWD
#local sql="alter user root@'localhost' identified by '$NEWPASSWD';"
#mysql -uroot -p'e)=Zgpc<p3rs' -e "$sql"
#mysql -uroot -p'$NEWPASSWD'
echo -e "\n\e[1;35m修改密码的SQL是:\e[0m alter user root@'localhost' identified by '新密码';"
}
install_mariadb(){
#echo -e "\e[1;35m 只在centos7.9版本测试正常，CentOS-6版本测试不成功\e[0m"
local SYSVERSION=`cat /etc/redhat-release | awk -F"." '{print $1}' | awk '{print $NF}'`
[ $SYSVERSION -eq 7 ] && echo -e "\n\e[1;33m 当前系统为$SYSVERSION 脚本支持安装 \e[0m" || { echo -e "\n\e[1;31m 当前系统为$SYSVERSION 脚本不支持安装\e[0m";exit; }
#exit
local version=10.10.3
#URL=https://dlm.mariadb.com/2690820/MariaDB/mariadb-10.10.2/bintar-linux-systemd-x86_64/mariadb-${version}-linux-systemd-x86_64.tar.gz
#URL=https://downloads.mysql.com/archives/get/p/23/file/mysql-8.0.30-linux-glibc2.12-x86_64.tar.xz
#URL=https://mirrors.tuna.tsinghua.edu.cn/mariadb/mariadb-10.6.11/bintar-linux-systemd-x86_64/mariadb-10.6.11-linux-systemd-x86_64.tar.gz
#URL=https://mirrors.tuna.tsinghua.edu.cn/mariadb/mariadb-${version}/bintar-linux-systemd-x86_64/mariadb-${version}-linux-systemd-x86_64.tar.gz
#echo -e "\e[1;35m 阿里源下载链接:\e[0m"https://mirrors.aliyun.com/mariadb/mariadb-${version}/bintar-linux-systemd-x86_64/mariadb-${version}-linux-systemd-x86_64.tar.gz
#echo -e "\e[1;35m 清华源下载链接:\e[0m"https://mirror.tuna.tsinghua.edu.cn/mariadb/mariadb-${version}/bintar-linux-systemd-x86_64/mariadb-${version}-linux-systemd-x86_64.tar.gz
URL=https://mirrors.aliyun.com/mariadb/mariadb-${version}/bintar-linux-systemd-x86_64/mariadb-${version}-linux-systemd-x86_64.tar.gz
local DATA_DIR=/data/mysql/
local DIR=/usr/local/
#echo -e "\e[1;35m 如果原始下载链接失败，可以重新执行尝试其他下载链接或者提前准备好压缩包文件放在root目录下\e[0m"
#echo -e "\e[1;35m 下面请输入下载链接:\e[0m"
#read -p "" URL
echo -e "\n\e[1;35m 数据库数据文件夹现在是${DATA_DIR} 解压目录是${DIR} \e[0m"
echo -e "\e[1;35m 接下来安装的版本是mariadb-${version},如果不想安装此版本请在5秒内停止运行脚本 \e[0m"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e '\a'
if id mysql &> /dev/null;then
echo -e "\n\e[1;33m 用户已存在 \e[0m"
else
groupadd -g 336 -r mysql && useradd -g mysql -s /sbin/nologin -d ${DATA_DIR} -r -u 336 mysql
#echo -e "\e[1;35m MySQL用户创建完成 \e[0m" "\e[1;32m [ ok ] \e[0m"
[ $? -eq 0 ] && echo -e "\n\e[1;35m MySQL用户创建完成 \e[0m" || { echo -e "\n\e[1;31m MySQL用户创建失败 \e[0m";exit; }
fi
if [ -e mariadb-${version}-linux-systemd-x86_64.tar.gz ];then
echo -e "\n\e[1;33m 文件已存在，准备安装... \e[0m"
else
echo -e "\n\e[1;33m 开始下载源文件(下载地址是阿里源，如果yum源配的没有阿里源可能会下载失败) \e[0m"
rpm -q wget &>/dev/null || yum -y install wget &>/dev/null
wget $URL && echo -e "\n\e[1;33m 下载成功\e[0m" || { echo -e "\n\e[1;33m 下载链接失效，请尝试更换其他下载链接或者提前准备好压缩包文件放在root目录下\e[0m" ;exit; }
fi
#[ -e mariadb-${version}-linux-systemd-x86_64.tar.gz ] && { echo "\e[1;34m 下载成功 \e[0m" } || { echo -e "\e[1;36m 下载失败,即将退出 \e[0m";exit; }
echo -e "\n\e[1;35m 开始解压源文件... \e[0m"
sleep 2
#tar xzvf mariadb-${version}-linux-systemd-x86_64.tar.gz -C ${DIR}
tar xzf mariadb-${version}-linux-systemd-x86_64.tar.gz -C ${DIR}
[ $? -eq 0 ] && echo -e "\n\e[1;35m 解压完成! \e[0m"
echo -e "\e[1;32m [ ok ] \e[0m"
sleep 1
echo -e "\e[1;35m 创建软链接 \e[0m"
ln -s /usr/local/mariadb-${version}-linux-systemd-x86_64 ${DIR}mysql
[ $? -eq 0 ] && echo -e "\e[1;32m [ ok ] \e[0m"
sleep 1
echo -e "\e[1;35m 建立环境变量 \e[0m"
echo "PATH=${DIR}mysql/bin:$PATH" > /etc/profile.d/mysql.sh
. /etc/profile.d/mysql.sh
[ $? -eq 0 ] && echo -e "\e[1;32m [ ok ] \e[0m"
sleep 1
echo -e "\e[1;35m 创建数据文件夹 \e[0m"
mkdir -p /data/mysql
chown -R mysql.mysql ${DATA_DIR}
chown -R mysql.mysql ${DIR}mysql
sleep 1
echo -e "\e[1;32m [ ok ] \e[0m"
echo -e "\e[1;33m 正在初始化数据库 \e[0m\n"
${DIR}mysql/scripts/mysql_install_db --user=mysql --basedir=${DIR}mysql --datadir=${DATA_DIR}
#添加client才能启动成功
cat > /etc/my.cnf << EOF
[mysqld]
datadir=${DATA_DIR}
socket=${DATA_DIR}mysql.sock
symbolic-links=0
character-set-server=utf8mb4
[mysqld_safe]
log-error=/data/mariadb/mariadb.log
pid-file=/data/mariadb/mariadb.pid
[client]
socket=/data/mysql/mysql.sock
default-character-set=utf8mb4
!includedir /etc/my.cnf.d
EOF
if [ $? -eq 0 ];then
echo -e "\e[1;35m 初始化数据库 \e[0m\n" "\e[1;32m [ ok ] \e[0m"
else
echo -e "\e[1;31m 初始化数据库 \e[0m\n" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
echo -e "\e[1;35m 创建log和pid文件夹 \e[0m\n" "\e[1;32m [ ok ] \e[0m"
mkdir ${DATA_DIR}{log,pid}
chown -R mysql.mysql ${DATA_DIR}
echo -e "\n\e[1;35m 正在复制systemd配置文件 \e[0m\n"
#ln -s mariadb-${version}-linux-systemd-x86_64/ mysql
cp /usr/local/mysql/support-files/systemd/mariadb.service /lib/systemd/system/
if [ $? -eq 0 ];then
echo -e "\e[1;35m 复制systemd配置文件 \e[0m\n" "\e[1;32m [ ok ] \e[0m"
else
echo -e "\e[1;31m 复制systemd配置文件 \e[0m\n" "\e[1;31m [ FAILED ] \e[0m"
exit
fi
#echo -e "\n\e[1;33m 正在启动服务 \e[0m"
systemctl daemon-reload
#systemctl start mariadb
systemctl enable --now mariadb
if [ $? -eq 0 ];then
echo -e "\e[1;35m 启动服务成功！ \e[0m"
else
echo -e "\e[1;31m 启动服务失败！ \e[0m"
exit
fi
#cat >> /etc/my.cnf.d/mysql-clients.cnf << EOF
#[mysql]
#socket=${DATA_DIR}mysql.sock
#EOF
ln -s ${DIR}mysql/bin/mariadb /usr/bin/mysql
exec bash
}
yum_mariadb(){
echo -e "\n\e[1;35m本次安装的是10.6版本\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
yum -y remove mariadb*
cat >> /etc/yum.repos.d/mariadb.repo <<EOF
[mariadb10.6]
name = MariaDB
baseurl = http://yum.mariadb.org/10.6/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
enabled=1
EOF
yum clean all && yum makecache
yum -y install mariadb mariadb-devel mariadb-libs mariadb-server
}
install_nginx(){
local version=1.20.2
local URL=http://nginx.org/download/nginx-${version}.tar.gz
echo -e "\e[1;35m 现在安装的版本是$version,如果不想安装此版本请在5秒内停止运行脚本 \e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
if [ -e nginx-${version}.tar.gz ];then
echo "文件存在，安装进行中。。。"
else
echo "文件不存在，开始下载源码文件。。。"
wget $URL
[ $? -eq 0 ] && { echo -e "\e[1;35m下载成功！\e[0m"; } || { echo -e "\e[1;35m下载失败！立即退出！\e[0m";exit; }
fi
if id nginx &> /dev/null;then
echo -e "\e[1;35m用户存在\e[0m"
else
groupadd -g 990 -r nginx && useradd -g nginx -s /sbin/nologin -r -u 990 nginx
echo -e "\e[1;35m用户不存在，创建nginx用户\e[0m"
fi
echo -e "\e[1;35m安装依赖包 \e[0m"
if [ $ID == "rocky" -o $ID == "centos" ];then
#yum -y install make gcc gcc-c++ libtool pcre pcre-devel zlib zlib-devel openssl openssl-devel perl-ExtUtils-Embed
software=("gcc"
"gcc-c++"
"glibc"
"make"
"pcre"
"pcre-devel"
"openssl"
"openssl-devel"
"autoconf"
"automake"
"libtool"
"zlib"
"zlib-devel"
"perl-ExtUtils-Embed"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
else
apt update &> /dev/null
apt -y install make gcc libpcre3 libpcre3-dev openssl libssl-dev zlib1g-dev &> /dev/null
fi
tar xf nginx-${version}.tar.gz -C /usr/local/src
cd /usr/local/src/nginx-${version}
./configure --prefix=/apps/nginx \
--user=nginx \
--group=nginx \
--with-http_ssl_module \
--with-http_v2_module \
--with-http_realip_module \
--with-http_stub_status_module \
--with-http_gzip_static_module \
--with-pcre \
--with-stream \
--with-stream_ssl_module \
--with-stream_realip_module
make && make install
[ $? -eq 0 ] && color "nginx编译成功" 0 || { color "nginx编译失败" 1 ;exit; }
chown -R nginx.nginx /apps/nginx
ln -s /apps/nginx/sbin/nginx /usr/sbin/
cat > /lib/systemd/system/nginx.service << EOF
[Unit]
Description=nginx - high performance web server
Documentation=http://nginx.org/en/docs/
After=network-online.target remote-fs.target nss-lookup.target
Wants=network-online.target
[Service]
Type=forking
#PIDFile=/apps/nginx/run/nginx.pid
ExecStart=/apps/nginx/sbin/nginx -c /apps/nginx/conf/nginx.conf
ExecReload=/bin/kill -s HUP \$MAINPID
ExecStop=/bin/kill -s TERM \$MAINPID
LimitNOFILE=100000
[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload
systemctl enable --now nginx &> /dev/null
[ $? -eq 0 ] && color "nginx启动 " 0 || { color "nginx启动" 1 ;exit; }
}
update_nginx(){
local version=1.22.1
local URL=http://nginx.org/download/nginx-${version}.tar.gz
echo -e "\n\e[1;35m更新的版本是nginx-${version}，需要更新其他版本请自行修改代码\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\n\e[1;35m安装依赖包\e[0m\n"
#yum install -y pcre pcre-devel openssl openssl-devel gcc gcc-c++ autoconf automake make
software=(
"gcc"
"gcc-c++"
"glibc"
"make"
"pcre"
"pcre-devel"
"openssl"
"openssl-devel"
"autoconf"
"automake"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
#查看当前nginx版本以及编译模块参数
echo -e "\n\e[1;31m已安装的版本，想退出安装请在五秒内终止脚本\e[0m\n"
/apps/nginx/sbin/nginx -V
#/srun3/nginx/sbin/nginx -V
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
if [ -e nginx-${version}.tar.gz ];then
echo -e "\e[1;35m文件已存在,开始安装\e[0m"
else
echo -e "\e[1;33m文件不存在，开始下载\e[0m"
wget $URL && echo -e "\e[1;35m下载成功\e[0m" || { echo -e "\e[1;31m下载失败，请检查下载链接是否失效\e[0m" ;exit; }
fi
#解压新版本
echo -e "\n\e[1;35m解压源文件\e[0m"
tar zxf nginx-${version}.tar.gz
cd nginx-${version}
#编译新版本
./configure --prefix=/apps/nginx \
--user=nginx \
--group=nginx \
--with-http_ssl_module \
--with-http_v2_module \
--with-http_realip_module \
--with-http_stub_status_module \
--with-http_gzip_static_module \
--with-pcre \
--with-stream \
--with-stream_ssl_module \
--with-stream_realip_module
#./configure --prefix=/srun3/nginx \
#--conf-path=/srun3/nginx/conf/nginx.conf \
#--sbin-path=/srun3/nginx/sbin/nginx \
#--pid-path=/srun3/nginx/run/nginx.pid \
#--error-log-path=/srun3/nginx/log/nginx-error.log \
#--http-log-path=/srun3/nginx/log/nginx-access.log \
#--user=nginx \
#--group=nginx \
#--with-http_ssl_module \
#--with-http_realip_module \
#--with-http_flv_module \
#--with-http_mp4_module \
#--with-http_gunzip_module \
#--with-http_gzip_static_module \
#--with-http_secure_link_module \
#--with-http_v2_module \
#--with-http_stub_status_module \
#--with-http_sub_module
#只要make无需要make install
make
#可以看到新编译的nginx版本
#objs/nginx -v
echo -e "\n\e[1;35m备份旧的nginx文件\e[0m"
#把之前的旧版的nginx命令备份
#cp /srun3/nginx/sbin/nginx /srun3/nginx/sbin/nginx.bak
cp /apps/nginx/sbin/nginx /apps/nginx/sbin/nginx.bak
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || { echo -e "\e[1;31m false \e[0m";exit; }
echo -e "\n\e[1;35m复制新版本源文件\e[0m"
#新版本nginx复制到旧版本目录中
#cp -f ./objs/nginx /srun3/nginx/sbin/
cp -f ./objs/nginx /apps/nginx/sbin/
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || { echo -e "\e[1;31m false \e[0m";exit; }
echo -e "\n\e[1;35m检测\e[0m"
#检测一下
#/srun3/nginx/sbin/nginx -t
/apps/nginx/sbin/nginx -t
echo -e "\n\e[1;35m平滑升级到新版本\e[0m"
#发送信号USR2 平滑升级可执行程序,将存储有旧版本主进程PID的文件重命名为nginx.pid.oldbin,并启动新的nginx
#此时两个master的进程都在运行,只是旧的master不在监听,由新的master监听80
#此时Nginx开启一个新的master进程,这个master进程会生成新的worker进程,这就是升级后的Nginx进程,此时老的进程不会自动退出,但是当接收到新的请求不作处理而是交给新的进程处理。
#先关闭旧nginx的worker进程,而不关闭nginx主进程方便回滚
#向原Nginx主进程发送WINCH信号,它会逐步关闭旗下的工作进程(主进程不退出),这时所有请求都会由新版Nginx处理
#kill -USR2 `cat /run/nginx.pid`
#kill -WINCH `cat /run/nginx.pid.oldbin`
kill -USR2 `cat /apps/nginx/logs/nginx.pid`
kill -WINCH `cat /apps/nginx/logs/nginx.pid.oldbin`
#如果旧版worker进程有用户的请求,会一直等待处理完后才会关闭
#经过一段时间测试,新版本服务没问题,最后发送QUIT信号,退出老的master
#kill -QUIT `cat /run/nginx.pid.oldbin`
kill -QUIT `cat /apps/nginx/logs/nginx.pid.oldbin`
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
#查看版本已经是新版了
echo -e "\n\e[1;35m升级后的版本\e[0m"
#/srun3/nginx/sbin/nginx -V
/apps/nginx/sbin/nginx -V
echo -e "\n\e[1;35m如果想回滚到旧版本，执行以下命令\e[0m"
echo -e "\n\e[1;35mkill -HUP `cat /run/nginx.pid.oldbin`\e[0m"
echo -e "\n\e[1;35mmv /apps/nginx/sbin/nginx.bak /apps/nginx/sbin/nginx\e[0m"
#回滚
#如果升级的版本发现问题需要回滚,可以发送HUP信号,重新拉起旧版本的worker
#kill -HUP `cat /run/nginx.pid.oldbin`
#恢复旧版的文件
#mv /srun3/nginx/sbin/nginx.bak /srun3/nginx/sbin/
#mv /apps/nginx/sbin/nginx.bak /apps/nginx/sbin/nginx
}
update_srunnginx(){
echo -e "\n\e[1;35m更新的版本是nginx-${version}，centos7安装的4k测试没出现问题\e[0m"
}
update_srunnginx2(){
echo -e "\n\e[1;35m更新的版本是nginx-${version}，在centos6上测试的\e[0m"
}
update_openssl(){
local version=1.1.1k
local URL=https://www.openssl.org/source/old/1.1.1/openssl-1.1.1k.tar.gz
echo -e "\n\e[1;35m本次安装的版本是openssl-${version}\e[0m"
echo -e "\e[1;33mwget无法下载，建议自行去官网下载${URL}\e[0m"
echo -e "\n\e[1;35m离线安装，请提前准备好对应版本的压缩包放在root目录下\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\n\e[1;35m现在已安装的版本\e[0m"
openssl version
echo -e "\e[1;33m将要安装的版本是openssl-${version},wget无法下载，建议自行去官网下载${URL}，\e[0m"
if [ -e openssl-${version}.tar.gz ];then
echo -e "\e[1;35m文件已存在,开始安装\e[0m"
else
echo -e "\e[1;33m文件不存在，开始下载\e[0m"
wget $URL && echo -e "\e[1;33m下载成功\e[0m" || { echo -e "\e[1;31m下载失败，请检查下载链接是否失效\e[0m" ;exit; }
fi
echo -e "\e[1;34m安装依赖包\e[0m"
#yum install -y gcc gcc-c++ glibc make
software=(
"gcc"
"gcc-c++"
"glibc"
"make"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
tar zxf /root/openssl-${version}.tar.gz
cd /root/openssl-${version}
./config --prefix=/usr/local/openssl -d shared
make
#执行失败的话执行make clean清除make信息
#[ $? -eq 0 ] || make clean
sleep 1
make install
#备份旧的
mv /usr/bin/openssl /usr/bin/openssl.bak
#对新的创建软连接
ln -sf /usr/local/openssl/bin/openssl /usr/bin/openssl
#将 openssl 的 lib 库写进配置中，并使配置生效
#echo "/usr/local/openssl/lib64/" >> /etc/ld.so.conf
echo "/usr/local/openssl/lib" >> /etc/ld.so.conf
#验证：ldconfig -v|grep ssl //确定链接库
ldconfig -v
[ $? -eq 0 ] && echo -e "\e[1;35m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
#出现报错libssl.so.1.1。。。缺少依赖库
#ln -s /usr/local/lib/libcrypto.so.1.1 /usr/lib64/libcrypto.so.1.1
#ln -s /usr/local/lib/libssl.so.1.1 /usr/lib64/libssl.so.1.1
#echo "/usr/local/lib64" >> /etc/ld.so.conf
#ldconfig -v | grep ssl
#查看版本 是否安装成功
echo -e "\n\e[1;35m升级后版本\e[0m"
openssl version
}
update_openssh(){
local ZLIBV=1.2.13
local OPENSSHV=9.1p1
echo -e "\n\e[1;35m本次升级的版本openssh-${OPENSSHV}，zlib-${ZLIBV}\e[0m"
echo -e "\n\e[1;35m离线安装，请提前准备好对应版本的压缩包放在root目录下\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\n\e[1;35m已安装版本\e[0m"
ssh -V
echo -e "\n\e[1;35m解压源文件\e[0m"
tar -zxf /root/zlib-${ZLIBV}.tar.gz
tar -zxf /root/openssh-${OPENSSHV}.tar.gz
if [ -e zlib-${ZLIBV} ];then
echo -e "\n\e[1;35mzlib已解压\e[0m"
else
echo -e "\n\e[1;35m再试一次\e[0m"
tar zxf /root/zlib-${ZLIBV}.tar.gz
fi
if [ -e openssh-${OPENSSHV} ];then
echo -e "\n\e[1;35mopenssh已解压\e[0m"
else
echo -e "\n\e[1;35m再试一次\e[0m"
tar zxf /root/openssh-${OPENSSHV}.tar.gz
fi
echo -e "\n\e[1;35m安装依赖包\e[0m"
#yum install -y gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel pam-devel
#yum install -y pam* zlib*
software=("gcc"
"gcc-c++"
"glibc"
"make"
"autoconf"
"openssl"
"openssl-devel"
"pcre-devel"
"pam-devel"
"pam*"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
#tar zxf /root/zlib-${ZLIBV}.tar.gz
if [ -e /usr/local/zlib ];then
echo -e "\n\e[1;35m已存在\e[0m"
else
echo -e "\n\e[1;35m编译zlib\e[0m"
cd /root/zlib-${ZLIBV}/
./configure --prefix=/usr/local/zlib
make && make install
[ $? -eq 0 ] && echo -e "\e[1;35m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
fi
#tar zxf /root/openssh-${OPENSSHV}.tar.gz
if [ -e /usr/local/openssh ];then
echo -e "\n\e[1;35m已存在\e[0m"
else
echo -e "\n\e[1;35m编译openssh\e[0m"
cd /root/openssh-${OPENSSHV}/
./configure --prefix=/usr/local/openssh --with-ssl-dir=/usr/local/openssl --with-zlib=/usr/local/zlib --with-pam --without-openssl-header-check
make && make install
[ $? -eq 0 ] && echo -e "\e[1;35m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
fi
echo -e "\n\e[1;35m移除旧文件，迁入新文件\e[0m"
mkdir -p /data/opensshbak/
mv /etc/ssh/sshd_config /data/opensshbak/sshd_config.bak
cp /usr/local/openssh/etc/sshd_config /etc/ssh/sshd_config
mv /usr/sbin/sshd /data/opensshbak/sshd.bak
cp /usr/local/openssh/sbin/sshd /usr/sbin/sshd
mv /usr/bin/ssh /data/opensshbak/ssh.bak
cp /usr/local/openssh/bin/ssh /usr/bin/ssh
mv /usr/bin/ssh-keygen /data/opensshbak/ssh-keygen.bak
cp /usr/local/openssh/bin/ssh-keygen /usr/bin/ssh-keygen
mv /etc/ssh/ssh_host_ecdsa_key.pub /data/opensshbak/ssh_host_ecdsa_key.pub.bak
cp /usr/local/openssh/etc/ssh_host_ecdsa_key.pub /etc/ssh/ssh_host_ecdsa_key.pub
for i in $(rpm -qa |grep openssh);do rpm -e $i --nodeps ;done
mv /etc/ssh/sshd_config.rpmsave /etc/ssh/sshd_config
cp /root/openssh-${OPENSSHV}/contrib/redhat/sshd.init /etc/init.d/sshd
chmod u+x /etc/init.d/sshd
echo -e "\n\e[1;35m修改sshd配置文件\e[0m"
cp /etc/init.d/sshd /data/opensshbak/sshdnewbk
sed -i '/SSHD=/c\SSHD=\/usr\/local\/openssh\/sbin\/sshd' /etc/init.d/sshd
sed -i '/\/usr\/bin\/ssh-keygen/c\ \/usr\/local\/openssh\/bin\/ssh-keygen -A' /etc/init.d/sshd
sed -i '/ssh_host_rsa_key.pub/i\ \/sbin\/restorecon \/etc\/ssh\/ssh_host_key.pub' /etc/init.d/sshd
sed -i '/$SSHD $OPTIONS && success || failure/i\ \ OPTIONS="-f /etc/ssh/sshd_config"' /etc/rc.d/init.d/sshd
echo -e "\n\e[1;35m修改sshd_config配置文件\e[0m"
sed -i '/PasswordAuthentication/c\PasswordAuthentication yes' /etc/ssh/sshd_config
sed -i '/X11Forwarding/c\X11Forwarding yes' /etc/ssh/sshd_config
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config
cp -arp /usr/local/openssh/bin/* /usr/bin/
service sshd restart
echo -e "\n\e[1;35m配置开机项\e[0m"
chkconfig --add sshd
chkconfig --level 2345 sshd on
chkconfig --list
echo -e "\n\e[1;35m更新后版本\e[0m"
ssh -V
}
install_openssh1(){
echo -e "\e[1;34m作废\e[0m"
if [ ! -d /home/data ];then
mkdir /home/data
fi
cd /home/data
yum install wget -y
#wget -O openssh-8.6p1.tar.gz https://ftp.riken.jp/pub/OpenBSD/OpenSSH/portable/openssh-8.6p1.tar.gz
#wget -O zlib-1.2.11.tar.gz https://zlib.net/zlib-1.2.11.tar.gz
#wget -O openssl-1.1.1j.tar.gz https://www.openssl.org/source/openssl-1.1.1j.tar.gz
######保证下载的文件在/home/data里，且文件名相同
tar -zxf openssl-1.1.1q.tar.gz
tar -zxf zlib-1.2.13.tar.gz
tar -zxf openssh-9.1p1.tar.gz
chown -R root:root /home/data
#######################0end----------############################
##1---配置Telnet，以防SSH配置过程中出现问题，可以使用Telnet登录----
setenforce 0
#关闭selinux
systemctl stop firewalld
#关闭
systemctl disable firewalld
#yum install telnet telnet-server xinetd -y
##vi /etc/xinetd.conf
##修改disabled = no ，即可以使用telnet服务
#cp /etc/xinetd.conf /home/data/xinetd.comfbk
#sed -i '14a disabled = no ' /etc/xinetd.conf
##在第14行增加 disabled = no
#echo -e 'pts/0\npts/1\npts/2\npts/3' >>/etc/securetty
#systemctl start telnet.socket #开启服务
#systemctl start xinetd #开启服务
#systemctl enable telnet.socket #开机自起服务
#systemctl enable xinetd
##1end---------------------------------------------------------------
##2 升级 OpenZlib-----------------------------------------
yum install -y gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel pam-devel
yum install -y pam* zlib*
cd /home/data/zlib-1.2.13/
./configure --prefix=/usr/local/zlib
make && make install
##2end---------------------
##3升级openssl-------------
cd /home/data/openssl-1.1.1q//
./config --prefix=/usr/local/openssl -d shared
make && make install
echo '/usr/local/openssl/lib' >> /etc/ld.so.conf
ldconfig
mv /usr/bin/openssl /home/data/opensslbk
ln -s /usr/local/openssl/bin/openssl /usr/bin/openssl
##3end--and start update SSH------------------------
##4-----安装OpenSSH 8.6p1-------
cd /home/data/openssh-9.1p1/
./configure --prefix=/usr/local/openssh --with-ssl-dir=/usr/local/openssl --with-zlib=/usr/local/zlib --with-pam --without-openssl-header-check
make && make install
mv /etc/ssh/sshd_config /home/data/sshd_config.bak
cp /usr/local/openssh/etc/sshd_config /etc/ssh/sshd_config
mv /usr/sbin/sshd /home/data/sshd.bak
cp /usr/local/openssh/sbin/sshd /usr/sbin/sshd
mv /usr/bin/ssh /home/data/ssh.bak
cp /usr/local/openssh/bin/ssh /usr/bin/ssh
mv /usr/bin/ssh-keygen /home/data/ssh-keygen.bak
cp /usr/local/openssh/bin/ssh-keygen /usr/bin/ssh-keygen
mv /etc/ssh/ssh_host_ecdsa_key.pub /home/data/ssh_host_ecdsa_key.pub.bak
cp /usr/local/openssh/etc/ssh_host_ecdsa_key.pub /etc/ssh/ssh_host_ecdsa_key.pub
for i in $(rpm -qa |grep openssh);do rpm -e $i --nodeps ;done
#mv /etc/ssh/ssh_config.rpmsave /etc/ssh/ssh_config
mv /etc/ssh/sshd_config.rpmsave /etc/ssh/sshd_config
cp /home/data/openssh-9.1p1/contrib/redhat/sshd.init /etc/init.d/sshd
chmod u+x /etc/init.d/sshd
#-------------修改配置文件------------
cp /etc/init.d/sshd /home/data/sshdnewbk
sed -i '/SSHD=/c\SSHD=\/usr\/local\/openssh\/sbin\/sshd' /etc/init.d/sshd
sed -i '/\/usr\/bin\/ssh-keygen/c\ \/usr\/local\/openssh\/bin\/ssh-keygen -A' /etc/init.d/sshd
sed -i '/ssh_host_rsa_key.pub/i\ \/sbin\/restorecon \/etc\/ssh\/ssh_host_key.pub' /etc/init.d/sshd
sed -i '/$SSHD $OPTIONS && success || failure/i\ \ OPTIONS="-f /etc/ssh/sshd_config"' /etc/rc.d/init.d/sshd
#---------操作sshd_config-------
sed -i '/PasswordAuthentication/c\PasswordAuthentication yes' /etc/ssh/sshd_config
sed -i '/X11Forwarding/c\X11Forwarding yes' /etc/ssh/sshd_config
sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config
cp -arp /usr/local/openssh/bin/* /usr/bin/
service sshd restart
##3end------------------------------------------
#----------配置开机项---------------
chkconfig --add sshd
chkconfig --level 2345 sshd on
chkconfig --list
#----------关闭Telnet服务---------------
#systemctl stop telnet.socket
#systemctl stop xinetd
#systemctl disable xinetd.service
#systemctl disable telnet.socket
#--------清理安装过程文件---------------------
#rm -fr /home/data
}
c7_yum_docker(){
local VERSION=20.10.23-3.el7
echo -e "\n\e[1;35m此方法更换了所有源\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\n\e[1;35m使用阿里云的yum源安装docker-ce\e[0m"
local DIR1=$(date +%F)
mkdir -p /data/yumbak-$DIR1
echo -e "\n\e[1;35m备份原有的yum源，备份文件在/data/下\e[0m"
mv /etc/yum.repos.d/* /data/yumbak-$DIR1
cat > /etc/yum.repos.d/CentOS-Base.repo <<EOF
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-\$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/os/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/os/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/os/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-\$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/updates/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/updates/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/updates/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-\$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/extras/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/extras/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/extras/\$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-\$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/centosplus/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/centosplus/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/centosplus/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#contrib - packages by Centos Users
[contrib]
name=CentOS-\$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/\$releasever/contrib/\$basearch/
http://mirrors.aliyuncs.com/centos/\$releasever/contrib/\$basearch/
http://mirrors.cloud.aliyuncs.com/centos/\$releasever/contrib/\$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
EOF
cat > /etc/yum.repos.d/docker-ce.repo <<EOF
[docker-ce-stable]
name=Docker CE Stable - \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/\$basearch/stable
enabled=1
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/debug-\$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/source/stable
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test]
name=Docker CE Test - \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/\$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/debug-\$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/source/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly]
name=Docker CE Nightly - \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/\$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly-debuginfo]
name=Docker CE Nightly - Debuginfo \$basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/debug-\$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[docker-ce-nightly-source]
name=Docker CE Nightly - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/\$releasever/source/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
EOF
cat >/etc/yum.repos.d/epel.repo <<EOF
[epel]
name=Extra Packages for Enterprise Linux 7 - \$basearch
baseurl=http://mirrors.aliyun.com/epel/7/\$basearch
failovermethod=priority
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
[epel-debuginfo]
name=Extra Packages for Enterprise Linux 7 - \$basearch - Debug
baseurl=http://mirrors.aliyun.com/epel/7/\$basearch/debug
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
gpgcheck=0
[epel-source]
name=Extra Packages for Enterprise Linux 7 - \$basearch - Source
baseurl=http://mirrors.aliyun.com/epel/7/SRPMS
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
EOF
yum clean all
yum -y install docker-ce-${VERSION} docker-ce-cli-$VERSION
[ $? -eq 0 ] && echo -e "\e[1;35m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
#使用阿里做镜像加速
echo -e "\n\e[1;35m阿里镜像加速\e[0m"
[ -d /etc/docker ] || mkdir -p /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"registry-mirrors": ["https://si7y70hh.mirror.aliyuncs.com"]
}
EOF
systemctl enable --now docker
[ $? -eq 0 ] && echo -e "\e[1;35m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
echo -e "\n\e[1;35m安装的docker版本\e[0m"
docker version
}
c7_yum2_docker(){
DOCKER_VERSION="-20.10.9-3.el7"
echo -e "\n\e[1;35m此方法只添加了docker.repo，不想使用此方法请在五秒内终止脚本\e[0m"
echo -e "\n\e[1;35m安装完没有server端不知道原因\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
cat >/etc/yum.repos.d/docker.repo <<EOF
[docker]
name=docker
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7.9/x86_64/stable/
gpgcheck=0
EOF
yum clean all
yum repolist
#yum list docker-ce* --showduplicates | sort -r
yum -y install docker-ce${DOCKER_VERSION} docker-ce-cli${DOCKER_VERSION}
#使用阿里做镜像加速
echo -e "\n\e[1;35m配置阿里镜像加速\e[0m"
[ -d /etc/docker ] || mkdir -p /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"registry-mirrors": ["https://252ml0bu.mirror.aliyuncs.com"]
}
EOF
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
systemctl daemon-reload
systemctl enable --now docker
echo -e "\n\e[1;35m查看安装版本信息\e[0m"
docker version
systemctl restart docker
echo -e "\n\e[1;35m验证镜像拉取是否正常\e[0m"
docker run hello-world &>/dev/null
docker images
}
c8_yum_docker(){
local DOCKER_VERSION="-20.10.23-3.el8"
echo -e "\n\e[1;35m本次安装的版本是docker-ce${DOCKER_VERSION}\e[0m"
echo -e "\n\e[1;35m此方法只添加了docker.repo\e[0m"
echo -e "\n\e[1;35m不想安装请在五秒内终止脚本\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
cat >/etc/yum.repos.d/docker.repo <<EOF
[docker]
name=docker
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/8/x86_64/stable/
https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux/centos/8/x86_64/stable/
gpgcheck=0
EOF
yum clean all
yum repolist
#yum list docker-ce* --showduplicates | sort -r
yum -y install docker-ce${DOCKER_VERSION} docker-ce-cli${DOCKER_VERSION}
#使用阿里做镜像加速
echo -e "\n\e[1;35m配置阿里镜像加速\e[0m"
[ -d /etc/docker ] || mkdir -p /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"registry-mirrors": ["https://252ml0bu.mirror.aliyuncs.com"]
}
EOF
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
systemctl daemon-reload
systemctl enable --now docker
echo -e "\n\e[1;35m查看安装版本信息\e[0m"
docker version
systemctl restart docker
echo -e "\n\e[1;35m验证镜像拉取是否正常\e[0m"
docker run hello-world &>/dev/null
docker images
}
offline_install_docker(){
local DOCKER_VERSION=20.10.9
local URL=https://mirrors.aliyun.com/docker-ce/linux/static/stable/x86_64/docker-20.10.9.tgz
echo -e "\n\e[1;35m现在安装的版本是docker-${DOCKER_VERSION}，若不想安装此版本请在五秒内终止脚本运行\e[0m"
echo -e "\e[1;35mcentos7，rocky8上测试正常\e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
if [ -e docker-${DOCKER_VERSION}.tgz ];then
echo -e "\n\e[1;32m文件已存在,开始安装\e[0m"
else
echo -e "\n\e[1;33m文件不存在，开始下载\e[0m"
wget $URL && echo -e "\e[1;32m下载成功\e[0m" || { echo -e "\e[1;31m下载失败，请检查下载链接是否失效\e[0m" ;exit; }
fi
echo -e "\n\e[1;35m解压源文件，拷贝docker文件到bin下\e[0m"
tar xvf docker-${DOCKER_VERSION}.tgz -C /usr/local/
cp /usr/local/docker/* /usr/bin/
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
echo -e "\n\e[1;35m写入service文件\e[0m"
cat > /lib/systemd/system/docker.service <<EOF
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStart=/usr/bin/dockerd -H unix://var/run/docker.sock
ExecReload=/bin/kill -s HUP \$MAINPID
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
# Uncomment TasksMax if your systemd version supports it.
# Only systemd 226 and above support this version.
#TasksMax=infinity
TimeoutStartSec=0
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
# restart the docker process if it exits prematurely
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s
[Install]
WantedBy=multi-user.target
EOF
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
echo -e "\n\e[1;35m启动\e[0m"
systemctl daemon-reload
systemctl enable --now docker &>/dev/null
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
#使用阿里做镜像加速
echo -e "\n\e[1;35m配置阿里镜像加速\e[0m"
[ -d /etc/docker ] || mkdir -p /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"registry-mirrors": ["https://252ml0bu.mirror.aliyuncs.com"]
}
EOF
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
systemctl daemon-reload
systemctl restart docker
echo -e "\n\e[1;35m查看安装版本信息\e[0m"
docker version
echo -e "\n\e[1;35m拉取hello-world，验证镜像拉取是否正常\e[0m"
docker run hello-world &>/dev/null
docker images
}
redhat_install_clickhouse(){
sudo yum install -y yum-utils
sudo yum-config-manager --add-repo https://packages.clickhouse.com/rpm/clickhouse.repo
sudo yum install -y clickhouse-server clickhouse-client
sudo /etc/init.d/clickhouse-server start
clickhouse-client
# or "clickhouse-client --password" if you set up a password.
}
debian_install_clickhouse(){
#安装环境配置和安装软件更新
sudo apt-get install -y apt-transport-https ca-certificates dirmngr
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 8919F6BD2B48D754
echo "deb https://packages.clickhouse.com/deb stable main" | sudo tee \
/etc/apt/sources.list.d/clickhouse.list
sudo apt-get update
#安装clickhouse
sudo apt-get install -y clickhouse-server clickhouse-client
#启动clickhouse服务
sudo service clickhouse-server start
#启动客户端
clickhouse-client
# or "clickhouse-client --password" if you've set up a password.
exit
}
tgz_install_clickhouse(){
#获取最后一个版本号
LATEST_VERSION=$(curl -s https://packages.clickhouse.com/tgz/stable/ | \
grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sort -V -r | head -n 1)
export LATEST_VERSION
case $(uname -m) in
x86_64) ARCH=amd64 ;;
aarch64) ARCH=arm64 ;;
*) echo "Unknown architecture $(uname -m)"; exit 1 ;;
esac
#下载对应版本号的tgz安装包
for PKG in clickhouse-common-static clickhouse-common-static-dbg clickhouse-server clickhouse-client
do
curl -fO "https://packages.clickhouse.com/tgz/stable/$PKG-$LATEST_VERSION-${ARCH}.tgz" \
|| curl -fO "https://packages.clickhouse.com/tgz/stable/$PKG-$LATEST_VERSION.tgz"
done
#解压压缩包并执行对应的脚本
tar -xzvf "clickhouse-common-static-$LATEST_VERSION-${ARCH}.tgz" \
|| tar -xzvf "clickhouse-common-static-$LATEST_VERSION.tgz"
#生成ClickHouse编译的二进制文件
sudo "clickhouse-common-static-$LATEST_VERSION/install/doinst.sh"
tar -xzvf "clickhouse-common-static-dbg-$LATEST_VERSION-${ARCH}.tgz" \
|| tar -xzvf "clickhouse-common-static-dbg-$LATEST_VERSION.tgz"
#生成带有调试信息的ClickHouse二进制文件
sudo "clickhouse-common-static-dbg-$LATEST_VERSION/install/doinst.sh"
tar -xzvf "clickhouse-server-$LATEST_VERSION-${ARCH}.tgz" \
|| tar -xzvf "clickhouse-server-$LATEST_VERSION.tgz"
#创建clickhouse-server软连接，并安装默认配置服务
sudo "clickhouse-server-$LATEST_VERSION/install/doinst.sh" configure
#启动服务
sudo /etc/init.d/clickhouse-server start
tar -xzvf "clickhouse-client-$LATEST_VERSION-${ARCH}.tgz" \
|| tar -xzvf "clickhouse-client-$LATEST_VERSION.tgz"
#创建clickhouse-client客户端工具软连接，并安装客户端配置文件
sudo "clickhouse-client-$LATEST_VERSION/install/doinst.sh"
}
compile_install_clickhouse(){
#gcc 10安装
# base centos 7
yum update
yum install -y gcc gcc-c++
yum install -y bzip2
wget -P /home https://mirrors.aliyun.com/gnu/gcc/gcc-10.2.0/gcc-10.2.0.tar.gz
cd /home && tar -xzvf /home/gcc-10.2.0.tar.gz
cd /home/gcc-10.2.0 && ./contrib/download_prerequisites
#这一步看网速，需要挺久的
mkdir /usr/lib/gcc/x86_64-redhat-linux/10.2.0
mkdir /home/gcc-build-10.2.0
cd /home/gcc-build-10.2.0
../gcc-10.2.0/configure --prefix=/usr/lib/gcc/x86_64-redhat-linux/10.2.0/ --enable-checking=release --enable-languages=c,c++ --disable-multilib
make && make install
mv /usr/bin/gcc /usr/bin/gcc-4.8.5
mv /usr/bin/g++ /usr/bin/g++-4.8.5
alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8.5 88 --slave /usr/bin/g++ g++ /usr/bin/g++-4.8.5
alternatives --install /usr/bin/gcc gcc /usr/lib/gcc/x86_64-redhat-linux/10.2.0/bin/x86_64-pc-linux-gnu-gcc 99 --slave /usr/bin/g++ g++ /usr/lib/gcc/x86_64-redhat-linux/10.2.0/bin/x86_64-pc-linux-gnu-g++
alternatives --config gcc
#输入2回车
# 安装re2c
yum -y install git automake libtool
git clone https://github.com.cnpmjs.org/skvadrik/re2c.git re2c
cd re2c
mkdir -p m4
./autogen.sh && ./configure --prefix=/usr && make
make install
# 安装ninja
## 编译安装cmake3.15以上，此教程举例安装3.21
yum install -y openssl-devel
wget https://cmake.org/files/v3.21/cmake-3.21.0-rc1.tar.gz
tar -zxvf cmake-3.21.0-rc1.tar.gz
cd cmake-3.21.0-rc1/
./bootstrap
gmake
gamke install
## 安装ninja
git clone https://github.com/ninja-build/ninja.git ninja
cd ninja
cmake -Bbuild-cmake -H.
cmake --build build-cmake
cp ninja /usr/bin/
ninja --version
#安装python3
yum install -y zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel
yum -y install python-pip
yum install libffi-devel -y
mv /usr/bin/python /usr/bin/python.bak
wget https://www.python.org/ftp/python/3.7.9/Python-3.7.9.tgz
tar -zxvf Python-3.7.9.tgz
./configure prefix=/usr/local/python3
make && make install
ln -s /usr/local/python3/bin/python3.7 /usr/bin/python
#修改yum配置
vi /usr/bin/yum
把#! /usr/bin/python修改为#! /usr/bin/python2
#
vi /usr/libexec/urlgrabber-ext-down
#把#! /usr/bin/python修改为#! /usr/bin/python2
#安装clickhouse
# 替换github的源（因为墙的原因）
git config --global url."https://hub.fastgit.org".insteadOf https://github.com
git clone https://github.com/ClickHouse/ClickHouse
cd ClickHouse
# 切换到指定版本
git tag -l
git checkout -b v21.7.5.29-stable
git submodule sync
git submodule update --init --recursive #等吧
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=/usr/local/clickhouse ../
ninja clickhouse #也是需要等很久，最好用screen
}
compile_install_redis(){
local VERSION=6.2.4
local URL=http://download.redis.io/releases/redis-6.2.4.tar.gz
local INSTALL_DIR=/apps/redis
local PASSWORD=123456
echo -e "\n\e[1;35m 安装的版本是redis-${VERSION}，如果不想安装此版本请在5秒内停止运行脚本 \e[0m"
echo -e "\e[1;35m redis密码是123456 \e[0m"
echo -e "\e[1;35m 安装目录是${INSTALL_DIR} \e[0m"
echo -e "\e[1;35m 官网下载很慢建议提前下载好放在root目录下 \e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
echo -e "\n\e[1;35m 消除redis安装启动后的warning \e[0m"
#消除三个warning
#Tcp backlog
#overcommit_memory
cat >> /etc/sysctl.conf <<EOF
net.core.somaxconn = 1024
vm.overcommit_memory = 1
EOF
sysctl -p
#transparent hugepage
if [ $ID = 'centos' -o $ID = 'rocky' ];then
echo 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' >> /etc/rc.d/rc.local
chmod +x /etc/rc.d/rc.local
else
#ubuntu
echo 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' >> /etc/rc.local
chmod +x /etc/rc.local
fi
echo -e "\n\e[1;35m 安装依赖包 \e[0m"
#安装依赖包 支持systemd
if [ $ID = 'centos' -o $ID = rocky ];then
#yum -y install gcc jemalloc-devel systemd-devel
software=("gcc"
"jemalloc-devel"
"systemd-devel"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
#ubuntu
else
#apt -y install make gcc libjemalloc-dev libsystemd-dev
software=("make"
"gcc"
"libjemalloc-dev"
"libsystemd-dev"
)
for i in ${software[@]}
do
dpkg -l $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { apt -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
fi
#下载源码
if [ -e /root/redis-${VERSION}.tar.gz ];then
echo -e "\n\e[1;35m 文件存在，开始安装\e[0m"
else
echo -e "\n\e[1;33m 文件不存在，开始下载\e[0m"
wget ${URL} && echo -e "\n\e[1;32m 下载成功\e[0m" || echo -e "\n\e[1;31m 下载失败，请检查下载链接\e[0m"
fi
echo -e "\n\e[1;35m 解压 \e[0m"
tar xvf /root/redis-${VERSION}.tar.gz
#编译安装 支持systemd
echo -e "\n\e[1;35m 编译安装 \e[0m"
cd /root/redis-${VERSION}
#指定redis安装目录
make -j 2 USE_SYSTEMD=yes PREFIX=${INSTALL_DIR} install
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
ln -s ${INSTALL_DIR}/bin/redis-* /usr/bin/
#配置环境变量
echo -e "\n\e[1;35m 配置环境变量\e[0m"
echo 'PATH=/apps/redis/bin:$PATH' > /etc/profile.d/redis.sh
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
#准备相关目录和配置文件
#创建配置文件、日志、数据等目录
echo -e "\n\e[1;35m 创建配置文件、日志、数据等目录\e[0m"
mkdir -p ${INSTALL_DIR}/{etc,log,data,run}
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
cp redis.conf ${INSTALL_DIR}/etc/
sed -i -e 's/bind 127.0.0.1/bind 0.0.0.0/' -e "/# requirepass/a requirepass ${PASSWORD}" -e "/^dir .*/c dir ${INSTALL_DIR}/data/" -e "/logfile .*/c logfile ${INSTALL_DIR}/log/redis-6379.log" -e "/^pidfile .*/c pidfile ${INSTALL_DIR}/run/redis_6379.pid" ${INSTALL_DIR}/etc/redis.conf
#前台启动 redis
#redis-server /apps/redis/etc/redis.conf
echo -e "\n\e[1;35m 创建redis用户\e[0m"
#创建redis用户
if id redis &> /dev/null;then
echo -e "\n\e[1;35m 用户已存在 \e[0m"
else
groupadd -g 679 -r redis && useradd -g redis -r -s /sbin/nologin -d /data/redis -u 679 redis
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
fi
#设置目录权限
chown -R redis.redis ${INSTALL_DIR}
#创建 Redis 服务 Service 文件
#可以复制CentOS8利用yum安装Redis生成的redis.service文件,进行修改
#cp /lib/systemd/system/redis.service /lib/systemd/system/
echo -e "\n\e[1;35m 配置service文件 \e[0m"
cat >> /lib/systemd/system/redis.service <<EOF
[Unit]
Description=Redis persistent key-value database
After=network.target
[Service]
ExecStart=${INSTALL_DIR}/bin/redis-server ${INSTALL_DIR}/etc/redis.conf --supervised systemd
ExecStop=/bin/kill -s QUIT \$MAINPID
#如果支持systemd可以启用此行
Type=notify
User=redis
Group=redis
RuntimeDirectory=redis
RuntimeDirectoryMode=0755
LimitNOFILE=1000000
#指定此值才支持更大的maxclients值
[Install]
WantedBy=multi-user.target
EOF
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
echo -e "\n\e[1;35m 启动redis \e[0m"
systemctl daemon-reload
systemctl enable --now redis
[ $? -eq 0 ] && echo -e "\n\e[1;32m ok \e[0m" || echo -e "\n\e[1;31m false\e[0m"
systemctl status redis
#验证客户端连接redis
#${INSTALL_DIR}/bin/redis-cli -h IP/HOSTNAME -p PORT -a PASSWORD
echo -e "\n\e[1;35m 连接redis命令 \e[0m"
echo -e "\n\e[1;35m redis-cli -h IP/HOSTNAME -p PORT -a PASSWORD \e[0m"
echo -e "\n\e[1;35m redis-cli -a PASSWORD \e[0m"
}
compile_install_keepalived(){
local VERSION=2.2.7
local URL=https://keepalived.org/software/keepalived-${VERSION}.tar.gz
echo -e "\n\e[1;35m安装的版本是keepalived-${VERSION}，如果不想安装此版本请在5秒内停止运行脚本 \e[0m\n"
for i in {5..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
if [ $ID = centos -o $ID = rocky ];then
yum -y install gcc curl openssl-devel libnl3-devel net-snmp-devel
else
apt update
apt -y install make gcc ipvsadm build-essential pkg-config automake autoconf libipset-dev libnl-3-dev libnl-genl-3-dev libssl-dev libxtables-dev libip4tc-dev libip6tc-dev libipset-dev libmagic-dev libsnmp-dev libglib2.0-dev libpcre2-dev libnftnl-dev libmnl-dev libsystemd-dev
fi
if [ -e keepalived-${VERSION}.tar.gz ];then
echo -e "\n\e[1;35m文件存在，开始安装\e[0m"
else
wget ${URL} && echo -e "\n\e[1;32m下载成功，开始解压安装\e[0m" || echo -e "\n\e[1;31m下载失败，检查下载路径\e[0m"
fi
[ -d /usr/local/src ] || mkdir -p /usr/local/src
echo -e "\n\e[1;35m开始解压\e[0m"
tar xvf keepalived-${VERSION}.tar.gz -C /usr/local/src
echo -e "\n\e[1;35m开始编译\e[0m"
cd /usr/local/src/keepalived-${VERSION}/
./configure --prefix=/usr/local/keepalived --disable-fwmark
make && make install
echo -e "\n\e[1;35m拷贝配置文件\e[0m"
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf.sample /etc/keepalived/keepalived.conf
systemctl enable --now keepalived.service
echo -e "\n\e[1;35m修改配置文件\e[0m"
sed -i 's/vrrp_strict/#vrrp_strict/' /etc/keepalived/keepalived.conf
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false\e[0m"
echo -e "\n\e[1;35m重启进程，等待10秒查看服务状态\e[0m"
killall keepalived
for i in {10..1}
do
echo -n "${i} "
echo -ne "\r"
sleep 1
done
systemctl restart keepalived.service
echo -e "\n\e[1;35m查看运行状态\e[0m"
systemctl status keepalived.service | awk "NR==3"
}
install_jumpserver(){
echo -e "\n\e[1;35m官方在线部署\e[0m"
curl -sSL https://github.com/jumpserver/jumpserver/releases/download/v2.28.7/quick_start.sh | bash
}
ubuntu_docker(){
${PURPLE} 还没写 $END
}
install_podman(){
${PURPLE} 还没写 $END
}
install_dns(){
${PURPLE} dns $END
}
install_lvs(){
${PURPLE} lvs $END
}
install_tomcat(){
${PURPLE} tomcat $END
}
install_haproxy(){
${PURPLE} haproxy $END
}
install_zabbix(){
${PURPLE} zabbix $END
}
install_jenkins(){
${PURPLE} jenkins $END
}
install_halo(){
${PURPLE} halo $END
}
install_lua(){
${PURPLE} lua $END
}
install_gitlab(){
${PURPLE} gitlab $END
}
install_git(){
${PURPLE} git $END
}
install_wordpress(){
${PURPLE} wordpress $END
}
install_apache(){
${PURPLE} apache $END
}
install_jdk(){
${PURPLE} jdk $END
}
install_php(){
${PURPLE} php $END
}
install_phpadmin(){
${PURPLE} phpadmin $END
}
install_memcached(){
${PURPLE} memcached $END
}
install_keepalived(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
********** **********
********** 安装keepalived **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.编译安装 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) compile_install_keepalived
;;
0) set_et
;;
esac
done
}
install_redis(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
********** **********
********** 安装Redis **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.编译安装 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) compile_install_redis
;;
0) set_et
;;
esac
done
}
install_clickhouse(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
========================================================
RedHat系列是直接yum下载安装
Debian系列是直接apt下载安装
包安装是自动下载官网tgz包再安装
========================================================
************************************************************
************************************************************
************************************************************
********** **********
********** 安装clickhouse **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.RedHat系列 **********
********** 3.Debian系列 **********
********** 4.包安装 **********
********** 5.源码编译 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) redhat_install_clickhouse
;;
3) debian_install_clickhouse
;;
4) tgz_install_clickhouse
;;
5) compile_install_clickhouse
;;
0) set_et
;;
esac
done
}
install_docker(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
========================================================
CentOS7yum源安装，只不过选项3用起来有点问题
Ubuntu安装还没写
安装podman还没写
二进制安装可在线可离线
========================================================
************************************************************
************************************************************
************************************************************
********** **********
********** 安装docker **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.CentOS7yum源安装 **********
********** 3.CentOS7yum源安装 **********
********** 4.CentOS8yum源版本 **********
********** 5.Ubuntu安装 **********
********** 6.二进制安装 **********
********** 7.安装podman **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) c7_yum_docker
;;
3) c7_yum2_docker
;;
4) c8_yum_docker
;;
5) ubuntu_docker
;;
6) offline_install_docker
;;
7) install_podman
;;
0) set_et
;;
esac
done
}
set_net(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
********** **********
********** 网卡配置 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.配置Redhat7以上系列网卡文件 **********
********** 3.配置Redhat6版本网卡文件 **********
********** 4.配置Ubuntu网卡文件 **********
********** ============================ **********
********** 5.Redhat系列修改网卡名为eth0 **********
********** 6.Ubuntu修改网卡名为eth0 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
2) configure_redhat_IP_address
;;
3) configure_redhat6_IP_address
;;
4) configure_ubuntu_IP_address
;;
5) set_redhat_netname
;;
6) set_ubuntu_netname
;;
1) break
;;
0) set_et
;;
esac
done
}
set_yum(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
============================================================
centos7.9的建议用8选项
2选项是没有挂载光盘
3选项是附带挂载光盘
============================================================
************************************************************
************************************************************
************************************************************
********** **********
********** 配置yum源 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.配置Rocky8 yum源 **********
********** 3.配置Rocky8 yum源 **********
********** 4.配置Rocky8 EPEL源 **********
********** ======================= **********
********** 5.配置centos7 阿里源 **********
********** 6.配置centos7 EPEL源 **********
********** 7.配置centos7.9 清华源 **********
********** 8.配置centos7.9 yum源 **********
********** ======================= **********
********** 9.配置centos6.10 yum源 **********
********** 10.配置centos6 EPEL源 **********
********** 11.配置centos6.5 yum源 **********
********** 12.配置centos6.6 yum源 **********
********** ======================= **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
2) set_yum2_rocky8
;;
3) set_yum_rocky8
;;
4) set_epel_rocky8
;;
5) set_yum_centos7
;;
6) set_epel_centos7
;;
7) set_yum1_centos7
;;
8) set_yum2_centos7
;;
9) set_yum_centos610
;;
10) set_epel_centos6
;;
11) set_yum_centos65
;;
12) set_yum_centos66
;;
1) break
;;
0) set_et
;;
esac
done
}
set_firewalld(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
********** **********
********** 关闭防火墙 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.Redhat7以上版本 **********
********** 3.Redhat6版本 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) disable_firewalld
;;
3) stop_centos6_firewalld
;;
0) set_et
;;
esac
done
}
software(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
========================================
Ubuntu和redhat安装的软件多少不一样
========================================
************************************************************
************************************************************
************************************************************
********** **********
********** 安装初始化软件 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.Redhat7,8系列 **********
********** 3.Redhat6系列 **********
********** 4.Ubuntu系列 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
1) break
;;
2) c7_software
;;
3) c6_software
;;
4) Ubuntu_software
;;
0) set_et
;;
esac
done
}
time1(){
clock -s
}
time2(){
clock -w
}
set_all(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
********** **********
********** 系统设置 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.关闭防火墙 3.关闭SELINUX **********
********** 4.安装初始化软件 5.配置yum源 **********
********** ==================== **********
********** 6.网卡配置 7.修改别名 **********
********** 8.修改主机名颜色 9.修改主机名 **********
********** ==================== **********
********** 10.设置vim 11.设置时区 **********
********** 12.设置登录显示 13.矫正软件时间 **********
********** ==================== **********
********** 14.矫正硬件时间 15.垃圾桶 **********
********** 16.设置邮箱 17.优化ulimit **********
********** ==================== **********
********** 18.禁用swap 19.启用swap **********
********** 20.修改ssh端口号 21.ubuntu远程登录**********
********** **********
********** 0.退出 **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
2) set_firewalld
;;
3) disable_selinux
;;
4) software
;;
5) set_yum
;;
6) set_net
;;
7) set_alias
;;
8) set_PS1
;;
9) set_hostname
;;
10) set_vim
;;
11) set_timezone
;;
12) set_motd1
;;
13) time1
;;
14) time2
;;
15) set_rm
;;
16) set_mail
;;
17) set_ulimit
;;
18) stop_swap
;;
19) start_swap
;;
20) set_ssh
;;
21) ubuntu_root_login
;;
1) break
;;
0) set_et
;;
esac
done
}
install_service(){
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
************************************************************
************************************************************
************************************************************
************************************************************
********** **********
********** 安装服务 **********
********** **********
********** 1.返回上一目录 **********
********** **********
********** 2.二进制安装MySQL **********
********** 3.yum源安装MySQL **********
********** 4.二进制安装MariaDB **********
********** 5.yum源安装MariaDB **********
********** =================== **********
********** 6.编译安装Nginx **********
********** 7.升级Nginx **********
********** 8.升级srun-Nginx **********
********** 9.升级旧版本srun-Nginx **********
********** =================== **********
********** 10.升级安装openssl **********
********** 11.升级安装openssh **********
********** =================== **********
********** 12.安装docker **********
********** 13.安装clickhouse **********
********** 14.安装Redis **********
********** 15.安装keepalived **********
********** 16.安装jumpserver **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;36m请输入序号: \e[0m')" Menu
case $Menu in
2) install_mysql
;;
3) rpm_install_mysql
;;
4) install_mariadb
;;
5) yum_mariadb
;;
6) install_nginx
;;
7) update_nginx
;;
8) update_srunnginx
;;
9) update_srunnginx2
;;
10) update_openssl
;;
11) update_openssh
;;
12) install_docker
;;
13) install_clickhouse
;;
14) install_redis
;;
15) install_keepalived
;;
16) install_jumpserver
;;
17) install_zabbix
;;
18) install_haproxy
;;
19) install_jenkins
;;
20) install_halo
;;
20) install_lua
;;
21) install_gitlab
;;
22) install_git
;;
23) install_wordpress
;;
24) install_apache
;;
25) install_jdk
;;
26) install_php
;;
27) install_phpadmin
;;
28) install_memcached
;;
1) break
;;
0) set_et
;;
esac
done
}
update_log(){
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2023-2-17 version:csh"
echo "新增keepalived"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2023-2-15 version:csh"
echo "新增redis"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2023-2-3 version:csh"
echo "新增clickhouse"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2023-2-2 version:csh"
echo "新增docker"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2023-1-27 version:csh"
echo "升级nginx，升级openssl"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2022-12-27 version:csh-v1.0"
echo "改进网卡配置流程"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2022-12-07 version:csh-v9.7.7.06"
echo "添加编译升级安装openssh，openssl"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2022-11-28 version:csh-v9.7.7.04"
echo "完善一些功能"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2022-11-27 version:csh-v9.7.7.02"
echo "添加mariadb，yum安装，二进制安装"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
echo "2022-11-26 version:csh-v9.7.7.01"
echo "修改centos7yum源，"
echo -e "\e[1;$[RANDOM%7+31]m=================================================================================================== \e[0m"
}
re(){
init 6
}
shut(){
init 0
#shutdown -r now
}
set_openEuler(){
echo -e "\e[1;33m基础的系统初始化，openEuler,centos,rocky,ubuntu系列都可以用\e[0m"
echo -e "\e[1;33m初始化内容:更新yum源，安装软件，关闭防火墙，关闭selinux，优化limits\e[0m"
sleep 2
echo -e "\n\e[1;35m1.更新yum源\e[0m"
yum clean all
yum makecache
echo -e "\n\e[1;35m安装软件\e[0m"
if [[ $ID =~ centos|rocky|openEuler ]];then
software=("lrzsz"
"vim-enhanced"
"bash-completion"
"wget"
"tcpdump"
"psmisc"
"rsync"
"net-tools"
"mlocate"
"bzip2"
"zip"
"unzip"
"lsof"
"telnet"
"bridge-utils.x86_64"
"libtalloc"
"libtalloc-devel"
"libpcap"
"libpcap-devel"
)
for i in ${software[@]}
do
rpm -q $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { yum -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
else
software=("lrzsz"
"vim"
"bash-completion"
"wget"
"tcpdump"
"psmisc"
"rsync"
"net-tools"
)
for i in ${software[@]}
do
dpkg -l $i &> /dev/null && echo -e "$i\e[1;32m已安装\e[0m" || { apt -y install $i &> /dev/null ; echo -e "$i\e[1;35m安装成功\e[0m" ; }
done
fi
#yum -y install vim lrzsz tar.x86_64 net-tools.x86_64 telnet ftp bridge-utils.x86_64 libtalloc libtalloc-devel psmisc libpcap libpcap-devel tcpdump
sleep 2
echo -e "\n\e[1;35m2.关闭防火墙\e[0m"
systemctl disable --now firewalld
#[ $? -eq 0 ] && echo -e "\e[1;34m 已关闭防火墙! \e[0m" || { echo -e "\e[1;31m 关闭失败！ \e[0m";exit; }
#systemctl status firewalld
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
sleep 2
echo -e "\n\e[1;35m3.关闭selinux\e[0m"
sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
sleep 2
echo -e "\n\e[1;35m4.优化limits\e[0m"
cat >> /etc/security/limits.conf << EOF
* soft nofile 65535
* hard nofile 65535
EOF
if [ $ID = 'centos' -o $ID = 'rocky' ];then
echo "PS1='\[\e[1;34m\][\[\e[$[RANDOM%7+31]m\]\u\[\e[$[RANDOM%7+31]m\]@\[\e[$[RANDOM%7+31]m\]\h\[\e[$[RANDOM%7+31]m\]\W\[\e[34m\]]\\$\[\e[0m\]'" >> /etc/bashrc
#echo "PS1='\[\e[1;36m\][\[\e[34m\]\u\[\e[35m\]@\[\e[32m\]\h\[\e[31m\]\W\[\e[36m\]]\\$\[\e[0m\]'" >> /etc/bashrc
#color "修改成功 " 0
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
else
echo "PS1='\[\e[1;34m\][\[\e[$[RANDOM%7+31]m\]\u\[\e[$[RANDOM%7+31]m\]@\[\e[$[RANDOM%7+31]m\]\h\[\e[$[RANDOM%7+31]m\]\W\[\e[34m\]]\\$\[\e[0m\]'" >> ~/.bashrc
#echo "PS1='\[\e[1;35m\][\[\e[35m\]\u\[\e[35m\]@\[\e[35m\]\h \[\e[36m\]\W\[\e[35m\]]\\$\[\e[0m\]'" >> ~/.bashrc
#color "修改成功 " 0
[ $? -eq 0 ] && echo -e "\e[1;32m ok \e[0m" || echo -e "\e[1;31m false \e[0m"
fi
#echo -e "\e[1;32m初始化完成！重启生效配置！\e[0m"
#CPU=`grep -c processor /proc/cpuinfo`
INFO=`cat /proc/cpuinfo | grep name | cut -d: -f2 |uniq -c | tr -s ' '`
MEM=`free -h | head -n2 |tail -n1 | awk '{print $2}'`
DISK=`lsblk /dev/sda | grep "^sda" | tr -s " " | cut -d " " -f4`
SYSTEM=`uname -m`
echo -e "\n\e[1;35m逻辑cpu个数 cpu型号 系统架构:$INFO $SYSTEM\e[0m"
echo -e "\n\e[1;35m内存总大小:$MEM\e[0m"
echo -e "\n\e[1;35m硬盘总大小:$DISK\e[0m"
sleep 2
init 6
}
one_step(){
while :;do
echo -e "\n\e[1;$[RANDOM%7+31]m ^_^~~~^_^centos7一键初始化 ^_^~~~^_^\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m1.关闭防火墙\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m2.selinux\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m3.优化limit\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m4.修改centos7-yum源\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m5.软件安装\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m6.添加vim开头显示\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m7.修改登录显示\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m8.修改网卡名\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m9.添加别名\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m10.修改主机名颜色\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m11.网卡配置\e[0m"
echo -e "\n\e[1;$[RANDOM%7+31]m0.退出\e[0m\n"
read -p "$(echo -e '\e[1;35m输入序号: \e[0m')" OOOO
case $OOOO in
1) disable_firewalld
;;
2) disable_selinux
;;
3) set_ulimit
;;
4) set_yum2_centos7
;;
5) c7_software
;;
6) set_vim
;;
7) set_motd
;;
8) set_redhat_netname
;;
9) set_alias
;;
10) set_PS1
;;
11) configure_redhat_IP_address
;;
0) set_et
;;
esac
done
}
while :;do
echo -e "\E[$[RANDOM%7+31];1m"
cat << EOF
========================================================
openEuler是一键配置基础的系统初始化
支持openEuler，centos7，rocky8
centos6需要自行去系统设置里面进行配置
========================================================
************************************************************
************************************************************
************************************************************
********** **********
********** Linux运维脚本 **********
********** **********
********** 1.系统设置 **********
********** 2.安装服务 **********
********** 3.openEuler **********
********** 4.一键配置初始化 **********
********** 5.更新日志 **********
********** 6.系统信息 **********
********** 7.重启 **********
********** 8.关机 **********
********** **********
********** 0.退出 **********
********** **********
************************************************************
************************************************************
************************************************************
EOF
echo -e "\E[0m"
read -p "$(echo -e '\e[1;34m输入选项: \e[0m')" option
case $option in
1)
set_all
;;
2) install_service
;;
3) set_openEuler
;;
4) one_step
;;
5) update_log
;;
6) systeminfo
;;
7) re
;;
8) shut
;;
0) set_et
;;
esac
done